top of page

Load data for .375 Win. + .375 | 300gr | Remington FMC RN

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.375 Win. + .375 | 300gr | Remington FMC RN

Load Specifications

Bullet:
.375 | 300gr | Remington FMC RN
Bullet Weight:
300gr | 19.4g
Bullet Diameter:
0.375" | 9.52mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.375 Win.
Case Length (l3):
2.020" | 51.3mm
Cartridge Length (C.O.L.):
2.522" | 64.0mm
Seated Depth:
0.498" | 12.7mm
Shank Seated Depth:
0.498" | 12.7mm
Case Capacity:
48.0 Grains of Water | 3.12 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
55114 psi | 3800 bar
LID:
LID_B5202_C571

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 60 loads in caliber .375 Win. with .375 | 300gr | Remington FMC RN bullet and 30 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
84%
49168
89%
**55
100%
ADI AR 2207 👍
<<locked>>
97%
46354
84%
**80
100%
ADI AR 2219
<<locked>>
97%
43033
78%
**70
97%
Accurate 1680 👍
<<locked>>
88%
48689
88%
**70
99%
Accurate 2015
<<locked>>
96%
33997
62%
**42
97%
[Accurate 2460]*
<<locked>>
97%
35650
65%
**68
92%
Alliant AR-Comp
<<locked>>
96%
30516
55%
**22
98%
Alliant Reloder-10x 👍
<<locked>>
97%
38392
70%
**11
99%
Alliant Reloder-7 👍
<<locked>>
96%
48979
89%
**80
100%
Baschieri & Pellagri 106
<<locked>>
97%
43598
79%
**08
97%
[Hodgdon CFE BLK]*
<<locked>>
96%
49226
89%
**47
94%
[Hodgdon H322]*
<<locked>>
96%
34795
63%
**52
94%
Hodgdon H335
<<locked>>
96%
41263
75%
**50
95%
Hodgdon H4198
<<locked>>
97%
48138
87%
**34
97%
IMR 4198
<<locked>>
96%
41568
75%
**98
100%
IMR 4227
<<locked>>
91%
48994
89%
**31
100%
Lovex D060
<<locked>>
84%
49211
89%
**50
100%
[Lovex D073.4]*
<<locked>>
97%
38072
69%
**88
92%
[Lovex D073.5]*
<<locked>>
97%
35114
64%
**62
91%
Lovex S053
<<locked>>
92%
48921
89%
**18
100%
Norma 200 👍
<<locked>>
97%
43555
79%
**67
100%
ReloadSwiss RS 36
<<locked>>
91%
48544
88%
**64
100%
[ReloadSwiss RS 40]*
<<locked>>
96%
37376
68%
**78
93%
[Rottweil R 901]*
<<locked>>
97%
32750
59%
**13
93%
SNPE Vectan BA6 1/2
<<locked>>
95%
48907
89%
**06
100%
SNPE Vectan SP 10
<<locked>>
96%
42032
76%
**64
96%
Shooters World Buffalo Rifle
<<locked>>
84%
49211
89%
**50
100%
Vihtavuori N110
<<locked>>
86%
48704
88%
**52
100%
Vihtavuori N120
<<locked>>
96%
42830
78%
**04
100%
Vihtavuori N130
<<locked>>
97%
36521
66%
**39
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
44904
81%
**13
100%
ADI AR 2207
<<locked>>
82%
29762
54%
**57
100%
[ADI AR 2219]*
<<locked>>
85%
29153
53%
**50
92%
Accurate 1680
<<locked>>
81%
38116
69%
**36
97%
Accurate 2015
<<locked>>
90%
28036
51%
**44
95%
[Accurate 2460]*
<<locked>>
94%
32372
59%
**19
90%
Alliant AR-Comp
<<locked>>
92%
27079
49%
**54
97%
Alliant Reloder-10x
<<locked>>
86%
28123
51%
**47
96%
Alliant Reloder-7
<<locked>>
81%
30966
56%
**40
97%
[Baschieri & Pellagri 106]*
<<locked>>
87%
32184
58%
**44
94%
[Hodgdon CFE BLK]*
<<locked>>
87%
36506
66%
**83
90%
[Hodgdon H322]*
<<locked>>
90%
29153
53%
**50
92%
[Hodgdon H335]*
<<locked>>
85%
28877
52%
**50
90%
[Hodgdon H4198]*
<<locked>>
85%
34229
62%
**50
94%
IMR 4198
<<locked>>
86%
31778
58%
**54
98%
IMR 4227
<<locked>>
81%
36941
67%
**86
100%
Lovex D060
<<locked>>
81%
44701
81%
**98
100%
[Lovex D073.4]*
<<locked>>
92%
32430
59%
**03
90%
[Lovex D073.5]*
<<locked>>
94%
31879
58%
**09
90%
Lovex S053
<<locked>>
81%
35824
65%
**67
100%
Norma 200
<<locked>>
83%
28413
52%
**44
97%
ReloadSwiss RS 36
<<locked>>
81%
35882
65%
**09
100%
[ReloadSwiss RS 40]*
<<locked>>
91%
31386
57%
**83
90%
[Rottweil R 901]*
<<locked>>
92%
29008
53%
**44
91%
SNPE Vectan BA6 1/2
<<locked>>
90%
43250
78%
**50
100%
[SNPE Vectan SP 10]*
<<locked>>
85%
28631
52%
**47
90%
Shooters World Buffalo Rifle
<<locked>>
81%
44701
81%
**98
100%
Vihtavuori N110
<<locked>>
81%
42525
77%
**93
100%
Vihtavuori N120
<<locked>>
85%
31212
57%
**54
100%
Vihtavuori N130
<<locked>>
90%
30429
55%
**44
97%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page