top of page

Load data for .375 Win. + .375 | 230gr | CutEdge ESP Raptor

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.375 Win. + .375 | 230gr | CutEdge ESP Raptor

Load Specifications

Bullet:
.375 | 230gr | CutEdge ESP Raptor
Manufacturer SKU:
ESP L230 RAPTOR WoT
Bullet Weight:
230gr | 14.9g
Bullet Diameter:
0.375" | 9.52mm
Bullet Length:
1.205" | 30.6mm
Caliber:
.375 Win.
Case Length (l3):
2.020" | 51.3mm
Cartridge Length (C.O.L.):
2.522" | 64.0mm
Seated Depth:
0.703" | 17.9mm
Shank Seated Depth:
0.703" | 17.9mm
Case Capacity:
48.0 Grains of Water | 3.12 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
55114 psi | 3800 bar
LID:
LID_B8546_C571

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 34 loads in caliber .375 Win. with .375 | 230gr | CutEdge ESP Raptor bullet and 17 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
95%
47674
87%
**19
100%
[ADI AR 2207]*
<<locked>>
96%
28007
51%
**88
94%
Accurate 5744
<<locked>>
93%
48080
87%
**01
97%
Accurate No. 11 FS 👍
<<locked>>
94%
49197
89%
**05
99%
[Alliant Reloder-7]*
<<locked>>
97%
30777
56%
**95
91%
Hodgdon LilGun 👍
<<locked>>
90%
49472
90%
**54
100%
IMR 4227
<<locked>>
97%
39349
71%
**80
96%
Lovex D060
<<locked>>
96%
49066
89%
**11
97%
Lovex D063
<<locked>>
92%
48863
89%
**01
97%
Lovex S040
<<locked>>
89%
49545
90%
**29
100%
Lovex S053
<<locked>>
97%
36550
66%
**64
99%
ReloadSwiss RS 36
<<locked>>
97%
37188
67%
**96
96%
SNPE Vectan BA6 1/2
<<locked>>
97%
34606
63%
**55
100%
Shooters World Blackout
<<locked>>
92%
48863
89%
**01
97%
Shooters World Buffalo Rifle
<<locked>>
96%
49066
89%
**11
97%
Vihtavuori N110
<<locked>>
96%
43163
78%
**16
100%
Vihtavuori N120
<<locked>>
96%
26861
49%
**32
95%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
31705
58%
**03
98%
[ADI AR 2207]*
<<locked>>
88%
22510
41%
**57
91%
[Accurate 5744]*
<<locked>>
81%
33402
61%
**81
92%
Accurate No. 11 FS
<<locked>>
81%
32445
59%
**81
96%
[Alliant Reloder-7]*
<<locked>>
94%
28514
52%
**55
90%
Hodgdon LilGun
<<locked>>
81%
35766
65%
**03
100%
[IMR 4227]*
<<locked>>
82%
25817
47%
**44
91%
[Lovex D060]*
<<locked>>
81%
31662
57%
**49
92%
[Lovex D063]*
<<locked>>
81%
33533
61%
**85
93%
Lovex S040
<<locked>>
81%
38856
70%
**08
100%
Lovex S053
<<locked>>
83%
24860
45%
**54
96%
[ReloadSwiss RS 36]*
<<locked>>
84%
24845
45%
**63
90%
SNPE Vectan BA6 1/2
<<locked>>
88%
27456
50%
**47
100%
[Shooters World Blackout]*
<<locked>>
81%
33533
61%
**85
93%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
31662
57%
**49
92%
Vihtavuori N110
<<locked>>
81%
27499
50%
**90
100%
[Vihtavuori N120]*
<<locked>>
91%
23264
42%
**50
93%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page