Load data for .375 SOCOM + .375 | 300gr | Speer AGS SP

.375 SOCOM cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:300 gr
Bullet Diameter:0.375"
Bullet Length:<<locked>>
Case Length (l3):1.575"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:60 Grains of Water
Primer Size:Large Pistol (LP)
Barrel Length:16"
Max. allowed Pressure:35,000 psi
Recommended Twist Rate:1:6.0

Load data in caliber .375 SOCOM with .375 | 300gr | Speer AGS SP bullet and 7 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>86%31,328 psi90%1670 fps96.2%
Accurate 2495<<locked>>96%31,473 psi90%1736 fps96.7%
Alliant AR-Comp<<locked>>88%30,574 psi87%1709 fps98.3%
Hodgdon TrailBoss<<locked>>98%30,922 psi88%1122 fps100%
ReloadSwiss RS 14<<locked>>98%30,879 psi88%1152 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%23,409 psi67%1033 fps100%
Vihtavuori N130<<locked>>82%31,169 psi89%1634 fps97%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>84%29,385 psi84%1634 fps95.4%
Accurate 2495<<locked>>92%27,586 psi79%1663 fps95.1%
Alliant AR-Comp31.5 gr80%24,076 psi69%1568 fps95.2%
Hodgdon TrailBoss11 gr80%23,612 psi67%1014 fps100%
ReloadSwiss RS 1411.2 gr80%23,438 psi67%1037 fps100%
ReloadSwiss RS 1411.2 gr80%17,361 psi50%919 fps100%
Vihtavuori N130<<locked>>80%29,240 psi84%1601 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 7 powders for .375 SOCOM loaded with the .375 | 300gr | Speer AGS SP. Accurate 2495 delivers the highest muzzle velocity at 1,736 fps; across all powders the maximum-charge window runs from 1,033 fps to 1,736 fps. ReloadSwiss RS 14 gives the best case fill at 100 %, and 7 of the 7 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (241 MPa), the top charges use 67–90 %, leaving at least 10 % headroom. The 300.0 gr projectile in 0.375" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .375 SOCOM with the .375 | 300gr | Speer AGS SP they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data