Load data for .375 SOCOM + .375 | 200gr | MAKER TREX

.375 SOCOM cartridge drawing
MAKER logo

Load Specifications

Bullet Manufacturer:MAKER
Bullet Weight:200 gr
Bullet Diameter:0.375"
Bullet Length:<<locked>>
Case Length (l3):1.575"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:60 Grains of Water
Primer Size:Large Pistol (LP)
Barrel Length:16"
Max. allowed Pressure:35,000 psi
Recommended Twist Rate:1:6.0

Load data in caliber .375 SOCOM with .375 | 200gr | MAKER TREX bullet and 4 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>86%30,835 psi88%2064 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%28,906 psi83%1398 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%28,355 psi81%1430 fps100%
Vihtavuori N120<<locked>>86%31,212 psi89%2047 fps97.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>84%28,718 psi82%2014 fps95.5%
Hodgdon TrailBoss11.6 gr80%20,987 psi60%1247 fps100%
ReloadSwiss RS 1411.8 gr80%20,494 psi59%1273 fps100%
Vihtavuori N120<<locked>>80%25,773 psi74%1919 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 4 powders for .375 SOCOM loaded with the .375 | 200gr | MAKER TREX. ADI AR 2207 delivers the highest muzzle velocity at 2,064 fps; across all powders the maximum-charge window runs from 1,398 fps to 2,064 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 4 of the 4 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (241 MPa), the top charges use 81–89 %, leaving at least 11 % headroom. The 200.0 gr projectile in 0.375" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .375 SOCOM with the .375 | 200gr | MAKER TREX they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data