top of page

Load data for .360 BUCKHAMMER + .358 | 250gr | Remington PSP

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): ADI AR 2207, Alliant Reloder-7, IMR 4198, Norma 200, Vihtavuori N120

.360 BUCKHAMMER + .358 | 250gr | Remington PSP

Load Specifications

Bullet:
.358 | 250gr | Remington PSP
Bullet Weight:
250gr | 16.2g
Bullet Diameter:
0.358" | 9.09mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.360 BUCKHAMMER
Case Length (l3):
1.800" | 45.7mm
Cartridge Length (C.O.L.):
2.462" | 62.5mm
Seated Depth:
0.337" | 8.6mm
Shank Seated Depth:
0.337" | 8.6mm
Case Capacity:
44.2 Grains of Water | 2.87 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
49995 psi | 3447 bar
LID:
LID_B5200_C1353

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 56 loads in caliber .360 BUCKHAMMER with .358 | 250gr | Remington PSP bullet and 28 powders such as ADI AR 2207, Alliant Reloder-7, IMR 4198, Norma 200, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
95%
43947
88%
**34
100%
ADI AR 2219
<<locked>>
96%
42235
84%
**34
96%
Accurate 1680
<<locked>>
86%
44150
88%
**91
98%
Accurate 2015
<<locked>>
97%
33837
68%
**06
97%
[Accurate 2495]*
<<locked>>
97%
24758
50%
**24
93%
Alliant AR-Comp
<<locked>>
97%
30719
61%
**83
97%
Alliant Reloder-10x
<<locked>>
96%
37333
75%
**69
98%
Alliant Reloder-7 👍
<<locked>>
94%
44614
89%
**14
99%
Baschieri & Pellagri 106
<<locked>>
97%
43511
87%
**72
97%
[Hodgdon CFE BLK]*
<<locked>>
93%
44440
89%
**55
92%
[Hodgdon H322]*
<<locked>>
96%
34809
70%
**16
94%
[Hodgdon H335]*
<<locked>>
96%
40944
82%
**21
94%
Hodgdon H4198
<<locked>>
94%
44193
88%
**62
96%
IMR 4198 👍
<<locked>>
97%
42148
84%
**82
99%
IMR 4227
<<locked>>
87%
43903
88%
**52
100%
[Lovex D073.4]*
<<locked>>
97%
38174
76%
**55
91%
Lovex S053
<<locked>>
89%
44063
88%
**42
100%
Norma 200 👍
<<locked>>
97%
43105
86%
**37
100%
ReloadSwiss RS 36
<<locked>>
88%
43758
88%
**85
100%
[ReloadSwiss RS 40]*
<<locked>>
97%
37884
76%
**52
92%
[Rottweil R 901]*
<<locked>>
97%
32677
65%
**70
92%
SNPE Vectan BA6 1/2
<<locked>>
91%
43758
88%
**24
100%
SNPE Vectan SP 10
<<locked>>
97%
42119
84%
**41
95%
[SNPE Vectan Tubal 3000]*
<<locked>>
97%
33141
66%
**24
92%
[Somchem S335]*
<<locked>>
97%
30937
62%
**18
92%
Vihtavuori N120 👍
<<locked>>
96%
42540
85%
**78
100%
Vihtavuori N130
<<locked>>
96%
35621
71%
**90
97%
[Vihtavuori N133]*
<<locked>>
97%
30081
60%
**88
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
28645
57%
**95
99%
[ADI AR 2219]*
<<locked>>
84%
28108
56%
**78
90%
Accurate 1680
<<locked>>
81%
38130
76%
**00
96%
[Accurate 2015]*
<<locked>>
82%
21683
43%
**44
91%
[Accurate 2495]*
<<locked>>
92%
21335
43%
**32
90%
[Alliant AR-Comp]*
<<locked>>
84%
21277
43%
**44
91%
[Alliant Reloder-10x]*
<<locked>>
81%
23743
47%
**03
93%
Alliant Reloder-7
<<locked>>
81%
30632
61%
**95
97%
[Baschieri & Pellagri 106]*
<<locked>>
81%
26919
54%
**90
91%
[Hodgdon CFE BLK]*
<<locked>>
89%
39523
79%
**86
90%
[Hodgdon H322]*
<<locked>>
89%
27746
55%
**72
90%
[Hodgdon H335]*
<<locked>>
88%
31009
62%
**47
90%
[Hodgdon H4198]*
<<locked>>
81%
30139
60%
**32
91%
IMR 4198
<<locked>>
81%
27122
54%
**13
96%
IMR 4227
<<locked>>
81%
36535
73%
**47
99%
[Lovex D073.4]*
<<locked>>
94%
34751
70%
**00
90%
Lovex S053
<<locked>>
81%
35723
71%
**27
100%
Norma 200
<<locked>>
81%
26556
53%
**62
96%
ReloadSwiss RS 36
<<locked>>
81%
35462
71%
**67
99%
[ReloadSwiss RS 40]*
<<locked>>
93%
33779
68%
**80
90%
[Rottweil R 901]*
<<locked>>
94%
30095
60%
**21
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
33257
67%
**93
100%
[SNPE Vectan SP 10]*
<<locked>>
86%
30066
60%
**31
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
94%
30153
60%
**68
90%
[Somchem S335]*
<<locked>>
92%
27050
54%
**39
90%
Vihtavuori N120
<<locked>>
81%
27021
54%
**32
99%
[Vihtavuori N130]*
<<locked>>
82%
23525
47%
**50
92%
[Vihtavuori N133]*
<<locked>>
88%
24018
48%
**50
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page