Load Specifications
Load data in caliber .358 Win. with .358 | 200gr | Nosler AccuBond bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-7, ADI AR 2219 and ADI AR 2207.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 92% | 50,879 psi | 87% | 2448 fps | 99.8% |
| Accurate 2015ᴾ | <<locked>> | 100% | 39,421 psi | 67% | 2365 fps | 98% |
| Accurate 2460ᴾ | <<locked>> | 100% | 43,294 psi | 74% | 2441 fps | 95.8% |
| Accurate LT-30 | <<locked>> | 98% | 51,387 psi | 87% | 2441 fps | 98.6% |
| Accurate LT-32 | <<locked>> | 98% | 51,953 psi | 88% | 2444 fps | 96.9% |
| ADI AR 2205 | <<locked>> | 84% | 51,097 psi | 87% | 2336 fps | 100% |
| ADI AR 2207 | <<locked>> | 98% | 52,054 psi | 89% | 2526 fps | 100% |
| ADI AR 2219ᴾ | <<locked>> | 100% | 51,024 psi | 87% | 2566 fps | 98.4% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 36,637 psi | 62% | 2382 fps | 99.3% |
| Alliant Reloder-10xᴾ | <<locked>> | 100% | 46,021 psi | 78% | 2487 fps | 99.7% |
| Alliant Reloder-7 | <<locked>> | 96% | 51,895 psi | 88% | 2500 fps | 100% |
| Baschieri & Pellagri 106ᴾ | <<locked>> | 100% | 52,040 psi | 89% | 2477 fps | 98.9% |
| Hodgdon H322ᴾ | <<locked>> | 100% | 45,730 psi | 78% | 2490 fps | 97.6% |
| Hodgdon H335ᴾ | <<locked>> | 100% | 46,804 psi | 80% | 2510 fps | 96.7% |
| Hodgdon H4198 | <<locked>> | 94% | 50,401 psi | 86% | 2444 fps | 98% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,603 psi | 52% | 1460 fps | 100% |
| IMR 4198ᴾ | <<locked>> | 100% | 48,617 psi | 83% | 2467 fps | 100% |
| IMR 4227 | <<locked>> | 90% | 50,633 psi | 86% | 2425 fps | 100% |
| Lovex D060 | <<locked>> | 84% | 51,068 psi | 87% | 2464 fps | 100% |
| Lovex D073.4 | <<locked>> | 98% | 52,170 psi | 89% | 2569 fps | 96.8% |
| Lovex S053 | <<locked>> | 92% | 51,837 psi | 88% | 2421 fps | 100% |
| Norma 200ᴾ | <<locked>> | 100% | 52,228 psi | 89% | 2556 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,037 psi | 51% | 1493 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 92% | 53,055 psi | 90% | 2500 fps | 100% |
| Shooters World AR Plus | <<locked>> | 98% | 52,170 psi | 89% | 2569 fps | 96.8% |
| Shooters World Buffalo Rifle | <<locked>> | 84% | 51,068 psi | 87% | 2464 fps | 100% |
| Shooters World SOCOM | <<locked>> | 84% | 51,938 psi | 88% | 2441 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 96% | 52,808 psi | 90% | 2287 fps | 100% |
| SNPE Vectan SP 10ᴾ | <<locked>> | 100% | 51,024 psi | 87% | 2569 fps | 97.5% |
| SNPE Vectan SP 3ᴾ | <<locked>> | 100% | 47,572 psi | 81% | 2487 fps | 98.7% |
| Vihtavuori N110 | <<locked>> | 86% | 51,329 psi | 87% | 2333 fps | 100% |
| Vihtavuori N120 | <<locked>> | 98% | 52,214 psi | 89% | 2480 fps | 100% |
| Vihtavuori N130ᴾ | <<locked>> | 100% | 44,672 psi | 76% | 2405 fps | 99.4% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 38,769 psi | 66% | 2313 fps | 97.5% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 31,415 psi | 53% | 2251 fps | 95.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 34,621 psi | 59% | 2188 fps | 97.7% |
| Accurate 2015 | <<locked>> | 92% | 30,603 psi | 52% | 2195 fps | 95.6% |
| Accurate 2460 | <<locked>> | 98% | 40,669 psi | 69% | 2398 fps | 95.1% |
| Accurate LT-30 | <<locked>> | 86% | 35,795 psi | 61% | 2192 fps | 95.3% |
| Accurate LT-32 | <<locked>> | 92% | 43,453 psi | 74% | 2320 fps | 95% |
| ADI AR 2205 | <<locked>> | 80% | 45,194 psi | 77% | 2260 fps | 100% |
| ADI AR 2207 | 30.8 gr | 80% | 30,081 psi | 51% | 2172 fps | 99.5% |
| ADI AR 2219 | 38.3 gr | 90% | 36,970 psi | 63% | 2336 fps | 95.3% |
| Alliant AR-Comp | <<locked>> | 88% | 25,730 psi | 44% | 2119 fps | 95.7% |
| Alliant Reloder-10x | <<locked>> | 82% | 26,542 psi | 45% | 2110 fps | 95.3% |
| Alliant Reloder-7 | 31.9 gr | 80% | 31,879 psi | 54% | 2169 fps | 97.6% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 35,665 psi | 61% | 2221 fps | 95.6% |
| Hodgdon H322 | <<locked>> | 94% | 38,101 psi | 65% | 2359 fps | 95.7% |
| Hodgdon H335 | <<locked>> | 96% | 40,901 psi | 70% | 2415 fps | 95.3% |
| Hodgdon H4198 | <<locked>> | 84% | 37,275 psi | 63% | 2228 fps | 95% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,394 psi | 38% | 1302 fps | 100% |
| IMR 4198 | <<locked>> | 80% | 27,731 psi | 47% | 2070 fps | 96.4% |
| IMR 4227 | <<locked>> | 80% | 37,782 psi | 64% | 2231 fps | 99.8% |
| Lovex D060 | <<locked>> | 80% | 45,585 psi | 78% | 2382 fps | 99.8% |
| Lovex D073.4 | <<locked>> | 94% | 45,049 psi | 77% | 2467 fps | 95.4% |
| Lovex S053 | <<locked>> | 80% | 36,666 psi | 62% | 2201 fps | 100% |
| Norma 200 | <<locked>> | 80% | 27,978 psi | 48% | 2133 fps | 96.8% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,075 psi | 38% | 1332 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 36,811 psi | 63% | 2257 fps | 99.7% |
| Shooters World AR Plus | <<locked>> | 94% | 45,049 psi | 77% | 2467 fps | 95.4% |
| Shooters World Buffalo Rifle | <<locked>> | 80% | 45,585 psi | 78% | 2382 fps | 99.8% |
| Shooters World SOCOM | <<locked>> | 80% | 45,629 psi | 78% | 2356 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 34,519 psi | 59% | 2044 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 94% | 42,018 psi | 72% | 2431 fps | 95.6% |
| SNPE Vectan SP 3 | <<locked>> | 88% | 33,170 psi | 56% | 2231 fps | 95.2% |
| Vihtavuori N110 | <<locked>> | 80% | 43,265 psi | 74% | 2231 fps | 100% |
| Vihtavuori N120 | <<locked>> | 80% | 30,356 psi | 52% | 2146 fps | 99.9% |
| Vihtavuori N130 | <<locked>> | 84% | 27,543 psi | 47% | 2077 fps | 95.2% |
| Vihtavuori N133 | <<locked>> | 94% | 32,401 psi | 55% | 2188 fps | 95.7% |
| Vihtavuori N135 | <<locked>> | 98% | 29,602 psi | 50% | 2208 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for .358 Win. loaded with the .358 | 200gr | Nosler AccuBond. Lovex D073.4 delivers the highest muzzle velocity at 2,569 fps; across all powders the maximum-charge window runs from 1,460 fps to 2,569 fps. Accurate 2015 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (405 MPa), the top charges use 51–90 %, leaving at least 10 % headroom. The 200.0 gr projectile in 0.358" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, ADI AR 2219 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-7, ADI AR 2219, ADI AR 2207 rank at the top here: for .358 Win. with the .358 | 200gr | Nosler AccuBond they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.