top of page

Load data for .350 Rem. Mag. + .356 | 125gr | H&N KS KB

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.350 Rem. Mag. + .356 | 125gr | H&N KS KB

Load Specifications

Bullet:
.356 | 125gr | H&N KS KB
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.356" | 9.04mm
Bullet Length:
0.530" | 13.5mm
Caliber:
.350 Rem. Mag.
Case Length (l3):
2.170" | 55.1mm
Cartridge Length (C.O.L.):
2.578" | 65.5mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
72.0 Grains of Water | 4.68 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
62366 psi | 4300 bar
LID:
LID_B7450_C504

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .350 Rem. Mag. with .356 | 125gr | H&N KS KB bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
87%
55709
89%
**58
100%
ADI AR 2207 👍
<<locked>>
97%
49603
80%
**66
100%
ADI AR 2219
<<locked>>
97%
46209
74%
**23
96%
Accurate 1680 👍
<<locked>>
90%
55492
89%
**06
98%
Accurate 2015
<<locked>>
97%
35708
57%
**64
95%
Accurate 5744
<<locked>>
85%
55898
90%
**28
100%
Accurate No. 11 FS
<<locked>>
83%
55448
89%
**50
100%
Alliant AR-Comp
<<locked>>
97%
31821
51%
**25
96%
Alliant Reloder-10x
<<locked>>
97%
40132
64%
**99
97%
Alliant Reloder-7 👍
<<locked>>
97%
52011
83%
**63
100%
Baschieri & Pellagri 106
<<locked>>
97%
47659
76%
**15
97%
[Hodgdon CFE BLK]*
<<locked>>
97%
54288
87%
**20
93%
[Hodgdon H322]*
<<locked>>
97%
37014
59%
**04
92%
[Hodgdon H335]*
<<locked>>
97%
45020
72%
**81
94%
Hodgdon H4198
<<locked>>
97%
51256
82%
**97
96%
Hodgdon TrailBoss
<<locked>>
97%
27499
44%
**28
100%
IMR 4198
<<locked>>
97%
43903
70%
**28
99%
IMR 4227 👍
<<locked>>
93%
55579
89%
**69
100%
Lovex D060
<<locked>>
87%
55477
89%
**15
100%
Lovex S053
<<locked>>
95%
55753
89%
**56
100%
Norma 200
<<locked>>
97%
45643
73%
**07
99%
ReloadSwiss RS 14
<<locked>>
97%
26818
43%
**70
100%
ReloadSwiss RS 36 👍
<<locked>>
94%
56072
90%
**15
100%
SNPE Vectan BA6 1/2
<<locked>>
96%
52373
84%
**33
100%
[SNPE Vectan SP 10]*
<<locked>>
97%
46166
74%
**04
94%
Shooters World Buffalo Rifle
<<locked>>
87%
55477
89%
**15
100%
Vihtavuori N110
<<locked>>
90%
56043
90%
**91
100%
Vihtavuori N120
<<locked>>
97%
45730
73%
**45
100%
Vihtavuori N130
<<locked>>
97%
38232
61%
**71
96%
[Vihtavuori N133]*
<<locked>>
97%
31256
50%
**87
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
45658
73%
**94
100%
ADI AR 2207
<<locked>>
81%
28877
46%
**87
97%
[ADI AR 2219]*
<<locked>>
87%
32822
53%
**79
90%
Accurate 1680
<<locked>>
81%
39624
64%
**91
95%
[Accurate 2015]*
<<locked>>
88%
26107
42%
**85
90%
Accurate 5744
<<locked>>
81%
49139
79%
**97
99%
Accurate No. 11 FS
<<locked>>
81%
50850
82%
**78
100%
[Alliant AR-Comp]*
<<locked>>
89%
24163
39%
**46
90%
[Alliant Reloder-10x]*
<<locked>>
83%
24468
39%
**46
90%
Alliant Reloder-7
<<locked>>
81%
30458
49%
**84
95%
[Baschieri & Pellagri 106]*
<<locked>>
84%
29994
48%
**05
90%
[Hodgdon CFE BLK]*
<<locked>>
91%
44512
71%
**30
90%
[Hodgdon H322]*
<<locked>>
93%
32822
53%
**79
90%
[Hodgdon H335]*
<<locked>>
90%
35563
57%
**61
90%
[Hodgdon H4198]*
<<locked>>
84%
33054
53%
**90
90%
Hodgdon TrailBoss
<<locked>>
81%
20958
34%
**50
100%
[IMR 4198]*
<<locked>>
81%
26716
43%
**59
93%
IMR 4227
<<locked>>
81%
37318
60%
**22
99%
Lovex D060
<<locked>>
81%
46311
74%
**48
99%
Lovex S053
<<locked>>
81%
35839
57%
**79
100%
[Norma 200]*
<<locked>>
81%
25512
41%
**79
92%
ReloadSwiss RS 14
<<locked>>
81%
20479
33%
**93
100%
ReloadSwiss RS 36
<<locked>>
81%
36027
58%
**25
98%
SNPE Vectan BA6 1/2
<<locked>>
81%
33663
54%
**99
100%
[SNPE Vectan SP 10]*
<<locked>>
90%
35273
57%
**54
90%
Shooters World Buffalo Rifle
<<locked>>
81%
46311
74%
**48
99%
Vihtavuori N110
<<locked>>
81%
42714
68%
**74
100%
Vihtavuori N120
<<locked>>
81%
27151
44%
**95
98%
[Vihtavuori N130]*
<<locked>>
84%
24961
40%
**94
90%
[Vihtavuori N133]*
<<locked>>
93%
27717
44%
**76
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page