top of page

Load data for .350 Rem. Mag. + .355 | 124gr | Speer HPSB GD

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.350 Rem. Mag. + .355 | 124gr | Speer HPSB GD

Load Specifications

Bullet:
.355 | 124gr | Speer HPSB GD
Manufacturer SKU:
4000
Bullet Weight:
124gr | 8.0g
Bullet Diameter:
0.355" | 9.02mm
Bullet Length:
0.580" | 14.7mm
Caliber:
.350 Rem. Mag.
Case Length (l3):
2.170" | 55.1mm
Cartridge Length (C.O.L.):
2.628" | 66.8mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
72.0 Grains of Water | 4.68 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
62366 psi | 4300 bar
LID:
LID_B6205_C504

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 58 loads in caliber .350 Rem. Mag. with .355 | 124gr | Speer HPSB GD bullet and 29 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
87%
55477
89%
**55
100%
ADI AR 2207 👍
<<locked>>
97%
50430
81%
**83
100%
ADI AR 2219
<<locked>>
97%
46557
75%
**23
95%
Accurate 1680 👍
<<locked>>
90%
55317
89%
**02
98%
Accurate 2015
<<locked>>
97%
36651
59%
**94
95%
Accurate 5744
<<locked>>
85%
55492
89%
**25
100%
Alliant AR-Comp
<<locked>>
97%
32634
52%
**54
96%
Alliant Reloder-10x
<<locked>>
96%
40872
66%
**19
97%
Alliant Reloder-7 👍
<<locked>>
97%
53055
85%
**83
100%
Baschieri & Pellagri 106
<<locked>>
97%
48240
77%
**25
97%
[Hodgdon CFE BLK]*
<<locked>>
97%
54853
88%
**30
93%
[Hodgdon H322]*
<<locked>>
97%
37826
61%
**23
92%
[Hodgdon H335]*
<<locked>>
97%
46398
74%
**10
94%
Hodgdon H4198
<<locked>>
97%
51808
83%
**17
96%
Hodgdon TrailBoss
<<locked>>
97%
27949
45%
**37
100%
IMR 4198
<<locked>>
97%
44498
71%
**41
99%
IMR 4227 👍
<<locked>>
93%
55347
89%
**76
100%
Lovex D060
<<locked>>
87%
56014
90%
**38
100%
Lovex S053
<<locked>>
94%
55535
89%
**56
100%
Norma 200
<<locked>>
97%
46804
75%
**33
99%
ReloadSwiss RS 14
<<locked>>
97%
27383
44%
**83
100%
ReloadSwiss RS 36 👍
<<locked>>
93%
55477
89%
**12
100%
SNPE Vectan BA6 1/2
<<locked>>
96%
52982
85%
**46
100%
[SNPE Vectan SP 10]*
<<locked>>
97%
47036
75%
**33
94%
Shooters World Buffalo Rifle
<<locked>>
87%
56014
90%
**38
100%
Vihtavuori N110
<<locked>>
89%
55709
89%
**87
100%
Vihtavuori N120
<<locked>>
97%
46456
74%
**61
100%
Vihtavuori N130
<<locked>>
97%
38928
62%
**00
97%
[Vihtavuori N133]*
<<locked>>
97%
32039
51%
**13
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
46311
74%
**10
100%
ADI AR 2207
<<locked>>
81%
29733
48%
**17
98%
[ADI AR 2219]*
<<locked>>
87%
33272
53%
**99
90%
Accurate 1680
<<locked>>
81%
40190
64%
**04
95%
[Accurate 2015]*
<<locked>>
88%
26600
43%
**05
90%
Accurate 5744
<<locked>>
81%
49603
80%
**20
99%
[Alliant AR-Comp]*
<<locked>>
88%
24497
39%
**56
90%
[Alliant Reloder-10x]*
<<locked>>
82%
24947
40%
**56
90%
Alliant Reloder-7
<<locked>>
81%
31459
50%
**07
95%
[Baschieri & Pellagri 106]*
<<locked>>
83%
30255
49%
**12
90%
[Hodgdon CFE BLK]*
<<locked>>
91%
45165
72%
**53
90%
[Hodgdon H322]*
<<locked>>
93%
32938
53%
**92
90%
[Hodgdon H335]*
<<locked>>
90%
35708
57%
**64
90%
[Hodgdon H4198]*
<<locked>>
83%
33098
53%
**87
90%
Hodgdon TrailBoss
<<locked>>
81%
21379
34%
**64
100%
[IMR 4198]*
<<locked>>
81%
27398
44%
**82
93%
IMR 4227
<<locked>>
81%
37927
61%
**35
99%
Lovex D060
<<locked>>
81%
46862
75%
**58
99%
Lovex S053
<<locked>>
81%
36564
59%
**99
100%
[Norma 200]*
<<locked>>
81%
26731
43%
**18
93%
ReloadSwiss RS 14
<<locked>>
81%
21045
34%
**06
100%
ReloadSwiss RS 36
<<locked>>
81%
37188
60%
**61
98%
SNPE Vectan BA6 1/2
<<locked>>
81%
34389
55%
**25
100%
[SNPE Vectan SP 10]*
<<locked>>
90%
36027
58%
**74
90%
Shooters World Buffalo Rifle
<<locked>>
81%
46862
75%
**58
99%
Vihtavuori N110
<<locked>>
81%
43468
70%
**91
100%
Vihtavuori N120
<<locked>>
81%
27862
45%
**22
98%
[Vihtavuori N130]*
<<locked>>
84%
25309
41%
**03
90%
[Vihtavuori N133]*
<<locked>>
93%
28398
46%
**02
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page