top of page

Load data for .350 Mag. Rigby + .357 | 110gr | Norma HP

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.350 Mag. Rigby + .357 | 110gr | Norma HP

Load Specifications

Bullet:
.357 | 110gr | Norma HP
Manufacturer SKU:
69123
Bullet Weight:
110gr | 7.1g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.481" | 12.2mm
Caliber:
.350 Mag. Rigby
Case Length (l3):
2.750" | 69.8mm
Cartridge Length (C.O.L.):
3.109" | 79.0mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
91.1 Grains of Water | 5.92 cm³
Primer Size:
Large Rifle Magnum (LRM)
Max. allowed Pressure:
44962 psi | 3100 bar
LID:
LID_B3893_C501

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .350 Mag. Rigby with .357 | 110gr | Norma HP bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
84%
40393
90%
**38
100%
ADI AR 2219
<<locked>>
87%
40001
89%
**48
95%
Accurate 2015
<<locked>>
92%
40132
89%
**12
97%
Accurate 2495
<<locked>>
97%
37101
83%
**22
96%
[Accurate 2520]*
<<locked>>
96%
39885
89%
**38
92%
Alliant AR-Comp 👍
<<locked>>
96%
40132
89%
**17
99%
Alliant Reloder-10x
<<locked>>
89%
40393
90%
**58
98%
Baschieri & Pellagri 106
<<locked>>
86%
40292
90%
**14
95%
Hodgdon H322
<<locked>>
92%
40350
90%
**48
95%
[Hodgdon H335]*
<<locked>>
87%
40118
89%
**28
93%
[Hodgdon H4198]*
<<locked>>
84%
40408
90%
**40
94%
Hodgdon TrailBoss
<<locked>>
96%
29138
65%
**97
100%
[IMR 3031]*
<<locked>>
97%
35186
78%
**66
93%
IMR 4198
<<locked>>
87%
39987
89%
**09
98%
Norma 200
<<locked>>
86%
40118
89%
**25
98%
[Norma 202]*
<<locked>>
97%
40030
89%
**35
93%
ReloadSwiss RS 14
<<locked>>
96%
28892
64%
**52
100%
[ReloadSwiss RS 40]*
<<locked>>
90%
39900
89%
**96
92%
[Rottweil R 901]*
<<locked>>
95%
40321
90%
**19
93%
[SNPE Vectan SP 10]*
<<locked>>
86%
40161
89%
**28
93%
[SNPE Vectan Tubal 3000]*
<<locked>>
94%
40234
89%
**33
93%
[SNPE Vectan Tubal 5000]*
<<locked>>
97%
34664
77%
**92
92%
[Somchem S335]*
<<locked>>
95%
40074
89%
**53
94%
Vihtavuori N120
<<locked>>
86%
40451
90%
**86
100%
Vihtavuori N130
<<locked>>
91%
40147
89%
**66
97%
Vihtavuori N133
<<locked>>
97%
39450
88%
**60
96%
[Vihtavuori N140]*
<<locked>>
97%
37579
84%
**30
93%
[Vihtavuori N540]*
<<locked>>
97%
37362
83%
**50
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
36622
81%
**43
99%
[ADI AR 2219]*
<<locked>>
81%
32735
73%
**28
91%
[Accurate 2015]*
<<locked>>
81%
26905
60%
**25
91%
[Accurate 2495]*
<<locked>>
88%
26571
59%
**94
90%
[Accurate 2520]*
<<locked>>
93%
35012
78%
**20
90%
[Alliant AR-Comp]*
<<locked>>
81%
23859
53%
**46
91%
[Alliant Reloder-10x]*
<<locked>>
81%
30226
67%
**59
94%
[Baschieri & Pellagri 106]*
<<locked>>
81%
33895
75%
**43
93%
[Hodgdon H322]*
<<locked>>
84%
30879
69%
**73
90%
[Hodgdon H335]*
<<locked>>
82%
33417
74%
**35
90%
[Hodgdon H4198]*
<<locked>>
81%
36883
82%
**55
93%
Hodgdon TrailBoss
<<locked>>
81%
22902
51%
**19
100%
[IMR 3031]*
<<locked>>
92%
29907
67%
**82
90%
IMR 4198
<<locked>>
81%
32648
73%
**99
96%
Norma 200
<<locked>>
81%
34258
76%
**78
97%
[Norma 202]*
<<locked>>
91%
33243
74%
**38
90%
ReloadSwiss RS 14
<<locked>>
81%
22423
50%
**59
100%
[ReloadSwiss RS 40]*
<<locked>>
87%
36361
81%
**07
90%
[Rottweil R 901]*
<<locked>>
89%
34026
76%
**32
90%
[SNPE Vectan SP 10]*
<<locked>>
82%
33866
75%
**48
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
89%
33141
74%
**40
90%
[SNPE Vectan Tubal 5000]*
<<locked>>
93%
30690
68%
**68
90%
[Somchem S335]*
<<locked>>
87%
30560
68%
**81
90%
Vihtavuori N120
<<locked>>
81%
34360
76%
**38
100%
[Vihtavuori N130]*
<<locked>>
81%
28587
64%
**35
93%
[Vihtavuori N133]*
<<locked>>
85%
26629
59%
**63
90%
[Vihtavuori N140]*
<<locked>>
92%
32082
71%
**73
90%
[Vihtavuori N540]*
<<locked>>
94%
33228
74%
**32
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page