top of page

Load data for .350 Mag. Rigby + .357 | 110gr | Impala LWFP KS

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.350 Mag. Rigby + .357 | 110gr | Impala LWFP KS

Load Specifications

Bullet:
.357 | 110gr | Impala LWFP KS
Bullet Weight:
110gr | 7.1g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.673" | 17.1mm
Caliber:
.350 Mag. Rigby
Case Length (l3):
2.750" | 69.8mm
Cartridge Length (C.O.L.):
3.301" | 83.8mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
91.1 Grains of Water | 5.92 cm³
Primer Size:
Large Rifle Magnum (LRM)
Max. allowed Pressure:
44962 psi | 3100 bar
LID:
LID_B3005_C501

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 56 loads in caliber .350 Mag. Rigby with .357 | 110gr | Impala LWFP KS bullet and 28 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2219]*
<<locked>>
84%
40321
90%
**19
94%
Accurate 2015
<<locked>>
88%
40466
90%
**92
97%
Accurate 2495
<<locked>>
94%
40306
90%
**84
97%
[Accurate 2520]*
<<locked>>
93%
40321
90%
**32
92%
[Accurate 4064]*
<<locked>>
97%
37043
82%
**66
93%
Alliant AR-Comp 👍
<<locked>>
92%
40161
89%
**81
99%
Alliant Reloder-10x
<<locked>>
85%
40408
90%
**25
98%
Baschieri & Pellagri 106
<<locked>>
83%
40335
90%
**97
95%
[Hodgdon H322]*
<<locked>>
89%
40118
89%
**22
94%
[Hodgdon H335]*
<<locked>>
84%
40292
90%
**15
93%
Hodgdon TrailBoss
<<locked>>
97%
30966
69%
**20
100%
IMR 3031
<<locked>>
97%
39784
88%
**78
95%
IMR 4198
<<locked>>
84%
40292
90%
**86
98%
[Lovex D073.6]*
<<locked>>
95%
40321
90%
**32
92%
[Norma 202]*
<<locked>>
93%
40292
90%
**09
93%
ReloadSwiss RS 14
<<locked>>
96%
30821
69%
**69
100%
[ReloadSwiss RS 40]*
<<locked>>
87%
40292
90%
**86
92%
[Rottweil R 901]*
<<locked>>
89%
40379
90%
**79
93%
[SNPE Vectan SP 10]*
<<locked>>
83%
40263
90%
**12
93%
[SNPE Vectan Tubal 3000]*
<<locked>>
91%
40219
89%
**07
93%
[SNPE Vectan Tubal 5000]*
<<locked>>
97%
38914
87%
**81
94%
[Shooters World Match Rifle]*
<<locked>>
95%
40321
90%
**32
92%
[Somchem S335]*
<<locked>>
92%
40219
89%
**33
94%
Vihtavuori N130
<<locked>>
87%
40147
89%
**40
97%
Vihtavuori N133
<<locked>>
94%
40176
89%
**53
96%
[Vihtavuori N135]*
<<locked>>
97%
33591
75%
**32
93%
[Vihtavuori N140]*
<<locked>>
95%
40030
89%
**69
94%
[Vihtavuori N540]*
<<locked>>
96%
40277
90%
**99
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2219]*
<<locked>>
81%
36970
82%
**30
93%
[Accurate 2015]*
<<locked>>
81%
31850
71%
**50
94%
[Accurate 2495]*
<<locked>>
81%
26368
59%
**41
90%
[Accurate 2520]*
<<locked>>
89%
35607
79%
**01
90%
[Accurate 4064]*
<<locked>>
92%
31879
71%
**09
90%
[Alliant AR-Comp]*
<<locked>>
81%
28340
63%
**07
94%
Alliant Reloder-10x
<<locked>>
81%
35273
78%
**78
96%
Baschieri & Pellagri 106
<<locked>>
81%
37826
84%
**32
95%
[Hodgdon H322]*
<<locked>>
81%
31256
70%
**50
90%
[Hodgdon H335]*
<<locked>>
81%
36405
81%
**01
91%
Hodgdon TrailBoss
<<locked>>
81%
24366
54%
**26
100%
[IMR 3031]*
<<locked>>
87%
30182
67%
**59
90%
IMR 4198
<<locked>>
81%
36376
81%
**87
98%
[Lovex D073.6]*
<<locked>>
91%
35607
79%
**01
90%
[Norma 202]*
<<locked>>
87%
33257
74%
**12
90%
ReloadSwiss RS 14
<<locked>>
81%
24352
54%
**78
100%
[ReloadSwiss RS 40]*
<<locked>>
84%
36840
82%
**81
90%
[Rottweil R 901]*
<<locked>>
84%
34171
76%
**92
90%
[SNPE Vectan SP 10]*
<<locked>>
81%
37579
84%
**30
92%
[SNPE Vectan Tubal 3000]*
<<locked>>
85%
33417
74%
**23
90%
[SNPE Vectan Tubal 5000]*
<<locked>>
89%
30922
69%
**45
90%
[Shooters World Match Rifle]*
<<locked>>
91%
35607
79%
**01
90%
[Somchem S335]*
<<locked>>
83%
30661
68%
**58
90%
Vihtavuori N130
<<locked>>
81%
33025
73%
**50
95%
[Vihtavuori N133]*
<<locked>>
81%
27688
62%
**63
91%
[Vihtavuori N135]*
<<locked>>
91%
28442
63%
**61
90%
[Vihtavuori N140]*
<<locked>>
88%
32343
72%
**56
90%
[Vihtavuori N540]*
<<locked>>
90%
33634
75%
**15
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page