top of page

Load data for .350 Legend + .358 | 200gr | Barnes X S

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.350 Legend + .358 | 200gr | Barnes X S

Load Specifications

Bullet:
.358 | 200gr | Barnes X S
Manufacturer SKU:
35815
Bullet Weight:
200gr | 13.0g
Bullet Diameter:
0.358" | 9.09mm
Bullet Length:
1.155" | 29.3mm
Caliber:
.350 Legend
Case Length (l3):
1.710" | 43.4mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.639" | 16.2mm
Shank Seated Depth:
0.639" | 16.2mm
Case Capacity:
36.8 Grains of Water | 2.39 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
54969 psi | 3790 bar
LID:
LID_B708_C500

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .350 Legend with .358 | 200gr | Barnes X S bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
97%
47239
86%
**68
99%
[Accurate 5744]*
<<locked>>
94%
47239
86%
**24
94%
Accurate No. 11 FS
<<locked>>
95%
47776
87%
**34
97%
Hodgdon LilGun 👍
<<locked>>
92%
47674
87%
**00
100%
[IMR 4227]*
<<locked>>
97%
37623
68%
**96
93%
[Lovex D060]*
<<locked>>
97%
47239
86%
**24
94%
[Lovex D063]*
<<locked>>
94%
47442
86%
**18
93%
Lovex S040
<<locked>>
90%
48515
88%
**88
100%
[ReloadSwiss RS 36]*
<<locked>>
96%
34722
63%
**96
92%
[Shooters World Blackout]*
<<locked>>
94%
47442
86%
**18
93%
[Shooters World Buffalo Rifle]*
<<locked>>
97%
47239
86%
**24
94%
Vihtavuori N110
<<locked>>
96%
40437
74%
**52
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
88%
37753
69%
**50
97%
[Accurate 5744]*
<<locked>>
86%
37362
68%
**93
90%
[Accurate No. 11 FS]*
<<locked>>
84%
34606
63%
**63
94%
Hodgdon LilGun
<<locked>>
81%
33257
61%
**32
100%
[IMR 4227]*
<<locked>>
93%
34316
62%
**47
92%
[Lovex D060]*
<<locked>>
88%
37362
68%
**93
90%
[Lovex D063]*
<<locked>>
86%
37869
69%
**93
91%
Lovex S040
<<locked>>
81%
37884
69%
**63
100%
[ReloadSwiss RS 36]*
<<locked>>
93%
31647
58%
**44
90%
[Shooters World Blackout]*
<<locked>>
86%
37869
69%
**93
91%
[Shooters World Buffalo Rifle]*
<<locked>>
88%
37362
68%
**93
90%
Vihtavuori N110
<<locked>>
88%
33620
61%
**57
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page