top of page

Load data for .350 Legend + .358 | 178gr | Hammer Stone Hammer

Recommended Powder(s): Hodgdon LilGun

.350 Legend + .358 | 178gr | Hammer Stone Hammer

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.358 | 178gr | Hammer Stone Hammer
Manufacturer SKU:
35178SH
Bullet Weight:
178gr | 11.5g
Bullet Diameter:
0.358" | 9.09mm
Bullet Length:
1.040" | 26.4mm
Caliber:
.350 Legend load data
Case Length (l3):
1.710" | 43.4mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.524" | 13.3mm
Shank Seated Depth:
0.524" | 13.3mm
Case Capacity:
36.8 Grains of Water | 2.39 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
54969 psi | 3790 bar
LID:
LID_B10975_C500
Last updated:
2025-11-05

Load data for 26 loads in caliber .350 Legend with .358 | 178gr | Hammer Stone Hammer bullet and 13 powders such as Hodgdon LilGun. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
96%
43366
79%
**26
98%
[Accurate 5744]*
<<locked>>
96%
46963
85%
**28
94%
Accurate No. 11 FS
<<locked>>
96%
45469
83%
**18
97%
Hodgdon LilGun 👍
<<locked>>
95%
47848
87%
**26
100%
[IMR 4227]*
<<locked>>
97%
34389
63%
**44
92%
[Lovex D060]*
<<locked>>
96%
43932
80%
**88
93%
[Lovex D063]*
<<locked>>
95%
47036
86%
**18
93%
Lovex S040
<<locked>>
92%
48095
87%
**88
100%
Lovex S053
<<locked>>
97%
31778
58%
**44
96%
SNPE Vectan BA6 1/2
<<locked>>
96%
29559
54%
**52
100%
[Shooters World Blackout]*
<<locked>>
95%
47036
86%
**18
93%
[Shooters World Buffalo Rifle]*
<<locked>>
96%
43932
80%
**88
93%
Vihtavuori N110
<<locked>>
96%
36666
67%
**13
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
28123
51%
**83
94%
[Accurate 5744]*
<<locked>>
87%
36216
66%
**70
90%
[Accurate No. 11 FS]*
<<locked>>
81%
27963
51%
**45
91%
Hodgdon LilGun
<<locked>>
81%
29733
54%
**86
100%
[IMR 4227]*
<<locked>>
93%
31415
57%
**91
90%
[Lovex D060]*
<<locked>>
90%
36883
67%
**83
90%
[Lovex D063]*
<<locked>>
88%
37434
68%
**90
90%
Lovex S040
<<locked>>
81%
34577
63%
**14
100%
[Lovex S053]*
<<locked>>
84%
22466
41%
**44
91%
SNPE Vectan BA6 1/2
<<locked>>
89%
24831
45%
**60
99%
[Shooters World Blackout]*
<<locked>>
88%
37434
68%
**90
90%
[Shooters World Buffalo Rifle]*
<<locked>>
90%
36883
67%
**83
90%
Vihtavuori N110
<<locked>>
81%
23815
43%
**83
98%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page