top of page

Load data for .350 Legend + .357 | 127gr | H&N KS HP HS

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.350 Legend + .357 | 127gr | H&N KS HP HS

Load Specifications

Bullet:
.357 | 127gr | H&N KS HP HS
Bullet Weight:
127gr | 8.2g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.587" | 14.9mm
Caliber:
.350 Legend
Case Length (l3):
1.710" | 43.4mm
Cartridge Length (C.O.L.):
2.175" | 55.2mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
36.8 Grains of Water | 2.39 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
54969 psi | 3790 bar
LID:
LID_B7468_C500

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 24 loads in caliber .350 Legend with .357 | 127gr | H&N KS HP HS bullet and 12 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
97%
43947
80%
**03
98%
[Accurate 5744]*
<<locked>>
97%
47210
86%
**38
93%
Accurate No. 11 FS
<<locked>>
96%
46006
84%
**12
97%
Hodgdon LilGun 👍
<<locked>>
95%
48051
87%
**46
100%
[Lovex D060]*
<<locked>>
96%
43540
79%
**75
92%
[Lovex D063]*
<<locked>>
96%
49226
90%
**41
94%
Lovex S040 👍
<<locked>>
93%
49023
89%
**05
100%
[Lovex S053]*
<<locked>>
96%
29834
54%
**49
94%
SNPE Vectan BA6 1/2
<<locked>>
97%
28384
52%
**60
100%
[Shooters World Blackout]*
<<locked>>
96%
49226
90%
**41
94%
[Shooters World Buffalo Rifle]*
<<locked>>
96%
43540
79%
**75
92%
Vihtavuori N110
<<locked>>
96%
35549
65%
**74
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
26194
48%
**59
93%
[Accurate 5744]*
<<locked>>
89%
37478
68%
**64
90%
[Accurate No. 11 FS]*
<<locked>>
82%
27296
50%
**57
90%
Hodgdon LilGun
<<locked>>
81%
28384
52%
**21
99%
[Lovex D060]*
<<locked>>
92%
38101
69%
**77
90%
[Lovex D063]*
<<locked>>
88%
37492
68%
**51
90%
Lovex S040
<<locked>>
81%
32996
60%
**49
99%
[Lovex S053]*
<<locked>>
87%
22379
41%
**56
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
17738
32%
**65
96%
[Shooters World Blackout]*
<<locked>>
88%
37492
68%
**51
90%
[Shooters World Buffalo Rifle]*
<<locked>>
92%
38101
69%
**77
90%
Vihtavuori N110
<<locked>>
81%
21437
39%
**46
96%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page