top of page

Load data for .350 Legend + .356 | 130gr | H&N RN HS

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.350 Legend + .356 | 130gr | H&N RN HS

Load Specifications

Bullet:
.356 | 130gr | H&N RN HS
Bullet Weight:
130gr | 8.4g
Bullet Diameter:
0.356" | 9.04mm
Bullet Length:
0.618" | 15.7mm
Caliber:
.350 Legend
Case Length (l3):
1.710" | 43.4mm
Cartridge Length (C.O.L.):
2.186" | 55.5mm
Seated Depth:
0.142" | 3.6mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
36.8 Grains of Water | 2.39 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
54969 psi | 3790 bar
LID:
LID_B7458_C500

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 24 loads in caliber .350 Legend with .356 | 130gr | H&N RN HS bullet and 12 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
97%
44715
81%
**90
98%
[Accurate 5744]*
<<locked>>
97%
48037
87%
**18
94%
Accurate No. 11 FS
<<locked>>
96%
47036
86%
**95
97%
Hodgdon LilGun 👍
<<locked>>
94%
48167
88%
**13
100%
[Lovex D060]*
<<locked>>
97%
44976
82%
**69
93%
[Lovex D063]*
<<locked>>
95%
48501
88%
**98
94%
Lovex S040
<<locked>>
92%
48095
87%
**62
100%
Lovex S053
<<locked>>
96%
30327
55%
**36
95%
SNPE Vectan BA6 1/2
<<locked>>
97%
28776
52%
**44
100%
[Shooters World Blackout]*
<<locked>>
95%
48501
88%
**98
94%
[Shooters World Buffalo Rifle]*
<<locked>>
97%
44976
82%
**69
93%
Vihtavuori N110
<<locked>>
96%
36201
66%
**54
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
26556
48%
**42
93%
[Accurate 5744]*
<<locked>>
88%
36724
67%
**18
90%
[Accurate No. 11 FS]*
<<locked>>
81%
26716
49%
**18
90%
Hodgdon LilGun
<<locked>>
81%
28340
52%
**92
99%
[Lovex D060]*
<<locked>>
90%
36724
67%
**18
90%
[Lovex D063]*
<<locked>>
88%
36811
67%
**08
90%
Lovex S040
<<locked>>
81%
33417
61%
**26
99%
[Lovex S053]*
<<locked>>
86%
21973
40%
**16
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
17956
33%
**49
96%
[Shooters World Blackout]*
<<locked>>
88%
36811
67%
**08
90%
[Shooters World Buffalo Rifle]*
<<locked>>
90%
36724
67%
**18
90%
Vihtavuori N110
<<locked>>
81%
21770
40%
**29
97%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page