Load data for .350 Legend + .356 | 125gr | SNS Coated Bullets RN

.350 Legend cartridge drawing
SNS Coated Bullets logo

Load Specifications

Bullet Manufacturer:SNS Coated Bullets
Bullet Weight:125 gr
Bullet Diameter:0.356"
Bullet Length:<<locked>>
Case Length (l3):1.71"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:36.8 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:20"
Max. allowed Pressure:55,000 psi

Load data in caliber .350 Legend with .356 | 125gr | SNS Coated Bullets RN bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Lovex S040 and ADI AR 2205.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS<<locked>>96%47,834 psi87%2559 fps96%
ADI APS 450<<locked>>82%49,603 psi90%1959 fps100%
ADI AR 2205<<locked>>98%47,529 psi86%2480 fps97.8%
Hodgdon LilGun<<locked>>94%49,458 psi90%2684 fps100%
Hodgdon TrailBossᴾ<<locked>>100%24,743 psi45%1555 fps100%
Lovex S040<<locked>>92%49,124 psi89%2539 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%23,772 psi43%1588 fps100%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%33,460 psi61%2283 fps99.8%
Vihtavuori N110ᴾ<<locked>>100%42,815 psi78%2500 fps99.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS<<locked>>94%44,469 psi81%2507 fps95.2%
ADI APS 450<<locked>>80%47,848 psi87%1936 fps100%
ADI AR 220526.3 gr90%37,608 psi68%2320 fps95.5%
Hodgdon LilGun25.5 gr80%30,095 psi55%2359 fps98.8%
Hodgdon TrailBoss<<locked>>80%17,811 psi32%1388 fps100%
Lovex S04021.9 gr80%34,389 psi63%2293 fps98.5%
ReloadSwiss RS 14<<locked>>80%16,998 psi31%1411 fps100%
SNPE Vectan BA6 1/2<<locked>>80%19,870 psi36%1936 fps95.6%
Vihtavuori N110<<locked>>80%23,946 psi44%2110 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 17 powders for .350 Legend loaded with the .356 | 125gr | SNS Coated Bullets RN. Hodgdon LilGun delivers the highest muzzle velocity at 2,684 fps; across all powders the maximum-charge window runs from 1,555 fps to 2,684 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 17 of the 17 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (379 MPa), the top charges use 43–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, IMR 4227, Lovex S053 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Lovex S040, ADI AR 2205 rank at the top here: for .350 Legend with the .356 | 125gr | SNS Coated Bullets RN they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 5744, IMR 4227, Lovex D060 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data