top of page

Load data for .350 Legend + .355 | 115gr | Barnes XPB

Recommended Powder(s): Hodgdon LilGun, Lovex S040

.350 Legend + .355 | 115gr | Barnes XPB

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.355 | 115gr | Barnes XPB
Manufacturer SKU:
35515
Bullet Weight:
115gr | 7.5g
Bullet Diameter:
0.355" | 9.02mm
Bullet Length:
0.710" | 18.0mm
Caliber:
.350 Legend load data
Case Length (l3):
1.710" | 43.4mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.194" | 4.9mm
Shank Seated Depth:
0.194" | 4.9mm
Case Capacity:
36.8 Grains of Water | 2.39 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
54969 psi | 3790 bar
LID:
LID_B698_C500
Last updated:
2025-01-01

Load data for 12 loads in caliber .350 Legend with .355 | 115gr | Barnes XPB bullet and 6 powders such as Hodgdon LilGun, Lovex S040. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service. 

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
96%
40045
73%
**00
95%
[Accurate No. 11 FS]*
<<locked>>
96%
41611
76%
**02
94%
Hodgdon LilGun 👍
<<locked>>
96%
44875
82%
**92
100%
Lovex S040 👍
<<locked>>
95%
47950
87%
**71
100%
SNPE Vectan BA6 1/2
<<locked>>
96%
25860
47%
**67
98%
Vihtavuori N110
<<locked>>
96%
31923
58%
**74
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
84%
27311
50%
**31
90%
[Accurate No. 11 FS]*
<<locked>>
89%
32547
59%
**28
90%
Hodgdon LilGun
<<locked>>
81%
25440
46%
**11
97%
Lovex S040
<<locked>>
81%
30821
56%
**62
97%
[SNPE Vectan BA6 1/2]*
<<locked>>
81%
16824
31%
**65
93%
[Vihtavuori N110]*
<<locked>>
81%
20030
36%
**49
93%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page