top of page

Load data for .350 Legend + .355 | 100gr | Sellier & Bellot SP

Recommended Powder(s):

.350 Legend + .355 | 100gr | Sellier & Bellot SP

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.355 | 100gr | Sellier & Bellot SP
Manufacturer SKU:
31993
Bullet Weight:
100gr | 6.5g
Bullet Diameter:
0.355" | 9.02mm
Bullet Length:
0.527" | 13.4mm
Caliber:
.350 Legend load data
Case Length (l3):
1.710" | 43.4mm
Cartridge Length (C.O.L.):
2.115" | 53.7mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
36.8 Grains of Water | 2.39 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
54969 psi | 3790 bar
LID:
LID_B7244_C500
Last updated:
2025-01-01

Load data for 16 loads in caliber .350 Legend with .355 | 100gr | Sellier & Bellot SP bullet and 8 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service. 

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
96%
70%
94%
Accurate No. 11 FS
97%
72%
91%
Hodgdon LilGun
96%
77%
100%
Hodgdon TrailBoss
96%
36%
100%
Lovex S040
97%
87%
99%
ReloadSwiss RS 14
95%
34%
100%
SNPE Vectan BA6 1/2
97%
45%
97%
Vihtavuori N110
96%
55%
97%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
89%
30400
55%
**74
90%
[Accurate No. 11 FS]*
<<locked>>
94%
35882
65%
**71
90%
Hodgdon LilGun
<<locked>>
81%
23728
43%
**33
95%
Hodgdon TrailBoss
<<locked>>
90%
17941
33%
**57
100%
Lovex S040
<<locked>>
81%
29385
53%
**07
95%
ReloadSwiss RS 14
<<locked>>
87%
15911
29%
**57
100%
[SNPE Vectan BA6 1/2]*
<<locked>>
82%
16447
30%
**96
90%
[Vihtavuori N110]*
<<locked>>
81%
18550
34%
**57
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page