Load data for .35 Win. + .358 | 140gr | AERO SB,- smax:11

Recommended Powder(s): IMR 4198

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.358 \| 140gr \| AERO SB,- smax:11
Bullet Weight:	140gr \| 9.1g
Bullet Diameter:	0.358" \| 9.09mm
Bullet Length:	0.866" \| 22.0mm
Caliber:	.35 Win. load data
Case Length (l3):	2.413" \| 61.3mm
Cartridge Length (C.O.L.):	3.127" \| 79.4mm
Seated Depth:	0.152" \| 3.9mm
Shank Seated Depth:	0.152" \| 3.9mm
Case Capacity:	69.0 Grains of Water \| 4.48 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	44237 psi \| 3050 bar
LID:	LID_B103_C489
Last updated:	2025-02-02

Load data for 46 loads in caliber .35 Win. with .358 | 140gr | AERO SB,- smax:11 bullet and 23 powders such as IMR 4198. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	39798	90%	**72	100%
[ADI AR 2219]*	<<locked>>	90%	39653	90%	**82	94%
Accurate 2015	<<locked>>	96%	39276	89%	**59	97%
[Accurate 2495]*	<<locked>>	97%	30516	69%	**44	93%
Alliant AR-Comp	<<locked>>	97%	35853	81%	**49	98%
Alliant Reloder-10x	<<locked>>	93%	39450	89%	**79	98%
Alliant Reloder-7	<<locked>>	85%	39233	89%	**07	98%
Baschieri & Pellagri 106	<<locked>>	89%	39537	89%	**67	95%
[Hodgdon H322]*	<<locked>>	96%	39653	90%	**82	94%
[Hodgdon H335]*	<<locked>>	90%	39160	89%	**59	92%
[Hodgdon H4198]*	<<locked>>	86%	39566	89%	**61	94%
Hodgdon TrailBoss	<<locked>>	96%	28877	65%	**96	100%
IMR 4198 👍	<<locked>>	91%	39755	90%	**33	98%
Norma 200	<<locked>>	89%	39769	90%	**76	98%
ReloadSwiss RS 14	<<locked>>	96%	28326	64%	**36	100%
[Rottweil R 901]*	<<locked>>	97%	37463	85%	**97	92%
SNPE Vectan BA6 1/2	<<locked>>	84%	39537	89%	**17	100%
[SNPE Vectan SP 10]*	<<locked>>	90%	39610	90%	**72	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	38145	86%	**48	92%
[Somchem S335]*	<<locked>>	97%	36230	82%	**28	93%
Vihtavuori N120	<<locked>>	89%	39291	89%	**10	100%
Vihtavuori N130	<<locked>>	95%	39740	90%	**20	97%
[Vihtavuori N133]*	<<locked>>	97%	34461	78%	**95	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32547	74%	**99	99%
[ADI AR 2219]*	<<locked>>	83%	31183	71%	**53	90%
[Accurate 2015]*	<<locked>>	82%	24874	56%	**59	90%
[Accurate 2495]*	<<locked>>	91%	25309	57%	**74	90%
[Alliant AR-Comp]*	<<locked>>	83%	23061	52%	**23	90%
[Alliant Reloder-10x]*	<<locked>>	81%	26658	60%	**31	92%
Alliant Reloder-7	<<locked>>	81%	34142	77%	**85	96%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30066	68%	**28	91%
[Hodgdon H322]*	<<locked>>	88%	31183	71%	**53	90%
[Hodgdon H335]*	<<locked>>	87%	34418	78%	**41	90%
[Hodgdon H4198]*	<<locked>>	81%	33359	75%	**07	91%
Hodgdon TrailBoss	<<locked>>	81%	22568	51%	**39	100%
IMR 4198	<<locked>>	81%	29689	67%	**74	95%
Norma 200	<<locked>>	81%	30095	68%	**33	95%
ReloadSwiss RS 14	<<locked>>	81%	22249	50%	**75	100%
[Rottweil R 901]*	<<locked>>	93%	33808	76%	**02	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	36912	83%	**71	100%
[SNPE Vectan SP 10]*	<<locked>>	85%	33707	76%	**28	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	93%	33634	76%	**36	90%
[Somchem S335]*	<<locked>>	91%	30676	69%	**87	90%
Vihtavuori N120	<<locked>>	81%	30545	69%	**03	99%
[Vihtavuori N130]*	<<locked>>	81%	25744	58%	**39	91%
[Vihtavuori N133]*	<<locked>>	88%	26876	61%	**72	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data