Load data for .35 Rem. + .358 | 200gr | Fox Classic Hunter

.35 Rem. cartridge drawing
Fox Bullets logo

Load Specifications

Bullet Manufacturer:Fox Bullets
Bullet Weight:200 gr
Bullet Diameter:0.358"
Bullet Length:<<locked>>
Case Length (l3):1.92"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:20"
Max. allowed Pressure:39,885 psi
Recommended Twist Rate:1:15.5

Load data in caliber .35 Rem. with .358 | 200gr | Fox Classic Hunter bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Vihtavuori N120 and Lovex S053.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>98%36,085 psi90%2057 fps98.1%
Hodgdon TrailBossᴾ<<locked>>100%27,238 psi68%1253 fps100%
IMR 4227<<locked>>88%35,331 psi89%1946 fps96.4%
Lovex S053<<locked>>90%35,882 psi90%1969 fps99.3%
ReloadSwiss RS 14ᴾ<<locked>>100%26,484 psi66%1283 fps100%
ReloadSwiss RS 36<<locked>>90%35,578 psi89%1995 fps96.4%
SNPE Vectan BA6 1/2<<locked>>92%35,491 psi89%1873 fps100%
Vihtavuori N110<<locked>>84%35,520 psi89%1919 fps100%
Vihtavuori N120<<locked>>96%34,360 psi86%1995 fps98.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
ADI AR 220725.3 gr90%28,210 psi71%1903 fps95.5%
Hodgdon TrailBoss<<locked>>80%19,783 psi50%1119 fps100%
IMR 4227<<locked>>84%31,343 psi79%1870 fps95.1%
Lovex S05321.6 gr80%26,760 psi67%1791 fps97.1%
ReloadSwiss RS 14<<locked>>80%19,363 psi49%1145 fps100%
ReloadSwiss RS 36<<locked>>86%31,676 psi79%1919 fps95%
SNPE Vectan BA6 1/2<<locked>>80%25,730 psi65%1706 fps100%
Vihtavuori N110<<locked>>80%31,662 psi79%1857 fps100%
Vihtavuori N12024.2 gr86%25,599 psi64%1814 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for .35 Rem. loaded with the .358 | 200gr | Fox Classic Hunter. ADI AR 2207 delivers the highest muzzle velocity at 2,057 fps; across all powders the maximum-charge window runs from 1,253 fps to 2,057 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (275 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. The 200.0 gr projectile in 0.358" calls for a 1:15.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Vihtavuori N120, Lovex S053 rank at the top here: for .35 Rem. with the .358 | 200gr | Fox Classic Hunter they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data