top of page

Load data for .35 Rem. + .356 | 120gr | H&N RN KB

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.35 Rem. + .356 | 120gr | H&N RN KB

Load Specifications

Bullet:
.356 | 120gr | H&N RN KB
Bullet Weight:
120gr | 7.8g
Bullet Diameter:
0.356" | 9.04mm
Bullet Length:
0.577" | 14.7mm
Caliber:
.35 Rem.
Case Length (l3):
1.920" | 48.8mm
Cartridge Length (C.O.L.):
2.355" | 59.8mm
Seated Depth:
0.142" | 3.6mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
51.0 Grains of Water | 3.31 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39885 psi | 2750 bar
LID:
LID_B7445_C483

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .35 Rem. with .356 | 120gr | H&N RN KB bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
84%
35433
89%
**30
98%
[ADI AR 2207]*
<<locked>>
97%
30371
76%
**99
94%
Hodgdon TrailBoss
<<locked>>
96%
23337
58%
**14
100%
[IMR 4227]*
<<locked>>
92%
35636
89%
**15
94%
[Lovex D060]*
<<locked>>
83%
35433
89%
**08
92%
Lovex S053
<<locked>>
94%
35114
88%
**35
98%
ReloadSwiss RS 14
<<locked>>
95%
21799
55%
**41
100%
[ReloadSwiss RS 36]*
<<locked>>
93%
35114
88%
**48
94%
SNPE Vectan BA6 1/2
<<locked>>
96%
35389
89%
**40
100%
[Shooters World Buffalo Rifle]*
<<locked>>
83%
35433
89%
**08
92%
Vihtavuori N110
<<locked>>
88%
35085
88%
**15
100%
[Vihtavuori N120]*
<<locked>>
97%
28239
71%
**97
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
32082
80%
**51
97%
[ADI AR 2207]*
<<locked>>
90%
24294
61%
**02
90%
Hodgdon TrailBoss
<<locked>>
81%
17941
45%
**67
100%
[IMR 4227]*
<<locked>>
84%
27702
69%
**98
90%
[Lovex D060]*
<<locked>>
81%
32996
83%
**36
91%
[Lovex S053]*
<<locked>>
81%
23366
59%
**03
93%
ReloadSwiss RS 14
<<locked>>
81%
16679
42%
**90
100%
[ReloadSwiss RS 36]*
<<locked>>
86%
27456
69%
**44
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
22278
56%
**05
99%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
32996
83%
**36
91%
Vihtavuori N110
<<locked>>
81%
28137
71%
**44
100%
[Vihtavuori N120]*
<<locked>>
89%
22046
55%
**80
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page