Load data for .35 Rem. + .355 | 95gr | Remington MC

.35 Rem. cartridge drawing
Remington logo

Load Specifications

Bullet Manufacturer:Remington
Bullet Weight:95 gr
Bullet Diameter:0.355"
Bullet Length:<<locked>>
Case Length (l3):1.92"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:20"
Max. allowed Pressure:39,885 psi

Load data in caliber .35 Rem. with .355 | 95gr | Remington MC bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Hodgdon LilGun<<locked>>90%34,287 psi86%3025 fps98%
Hodgdon TrailBossᴾ<<locked>>100%21,857 psi55%1896 fps100%
Lovex S040<<locked>>86%35,230 psi88%2851 fps96.6%
ReloadSwiss RS 14ᴾ<<locked>>100%20,450 psi51%1926 fps100%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%27,847 psi70%2674 fps97%
Vihtavuori N110ᴾ<<locked>>100%35,244 psi88%2933 fps97.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Hodgdon LilGun32.3 gr84%27,485 psi69%2835 fps95.5%
Hodgdon TrailBoss10 gr80%15,374 psi39%1690 fps100%
Lovex S040<<locked>>82%31,154 psi78%2743 fps95.2%
ReloadSwiss RS 1410.2 gr80%14,518 psi36%1716 fps100%
SNPE Vectan BA6 1/2<<locked>>94%23,699 psi59%2539 fps95%
Vihtavuori N110<<locked>>94%29,269 psi73%2779 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 6 powders for .35 Rem. loaded with the .355 | 95gr | Remington MC. Hodgdon LilGun delivers the highest muzzle velocity at 3,025 fps; across all powders the maximum-charge window runs from 1,896 fps to 3,025 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 6 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (275 MPa), the top charges use 51–88 %, leaving at least 12 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14, SNPE Vectan BA6 1/2 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .35 Rem. with the .355 | 95gr | Remington MC they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data