Load Specifications
Load data in caliber .35 Rem. with .355 | 115gr | Remington MC bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N110, SNPE Vectan BA6 1/2 and ReloadSwiss RS 14.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon LilGun | <<locked>> | 84% | 33,750 psi | 85% | 2756 fps | 99.4% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 23,714 psi | 59% | 1742 fps | 100% |
| Lovex S040 | <<locked>> | 82% | 35,969 psi | 90% | 2628 fps | 98.7% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 22,394 psi | 56% | 1772 fps | 100% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 32,735 psi | 82% | 2572 fps | 99.7% |
| Vihtavuori N110 | <<locked>> | 94% | 35,056 psi | 88% | 2680 fps | 99.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon LilGun | <<locked>> | 80% | 29,138 psi | 73% | 2641 fps | 98.4% |
| Hodgdon TrailBoss | <<locked>> | 80% | 16,795 psi | 42% | 1552 fps | 100% |
| Lovex S040 | <<locked>> | 80% | 33,620 psi | 84% | 2575 fps | 98.2% |
| ReloadSwiss RS 14 | 10.2 gr | 80% | 15,969 psi | 40% | 1581 fps | 100% |
| SNPE Vectan BA6 1/2 | 24.9 gr | 82% | 19,711 psi | 49% | 2188 fps | 95.3% |
| Vihtavuori N110 | 25.4 gr | 80% | 22,626 psi | 57% | 2343 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 6 powders for .35 Rem. loaded with the .355 | 115gr | Remington MC. Hodgdon LilGun delivers the highest muzzle velocity at 2,756 fps; across all powders the maximum-charge window runs from 1,742 fps to 2,756 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 6 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (275 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14, SNPE Vectan BA6 1/2 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N110, SNPE Vectan BA6 1/2, ReloadSwiss RS 14 rank at the top here: for .35 Rem. with the .355 | 115gr | Remington MC they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.