top of page

Load data for .338 ARC + .338 | 200gr | Hornady InterLock FP

Recommended Powder(s): ADI AR 2207, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200

.338 ARC + .338 | 200gr | Hornady InterLock FP

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.338 | 200gr | Hornady InterLock FP
Manufacturer SKU:
3315
Bullet Weight:
200gr | 13.0g
Bullet Diameter:
0.338" | 8.59mm
Bullet Length:
0.990" | 25.1mm
Caliber:
.338 ARC load data
Case Length (l3):
1.300" | 33.0mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.064" | 1.6mm
Shank Seated Depth:
0.064" | 1.6mm
Case Capacity:
36.0 Grains of Water | 2.34 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
51996 psi | 3585 bar
LID:
LID_B2745_C460
Last updated:
2025-02-02

Load data for 60 loads in caliber .338 ARC with .338 | 200gr | Hornady InterLock FP bullet and 30 powders such as ADI AR 2207, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 17.6 fps

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
94%
45556
88%
**98
100%
ADI AR 2219
<<locked>>
96%
43700
84%
**08
97%
Accurate 1680
<<locked>>
85%
45861
88%
**59
98%
Accurate 2015
<<locked>>
96%
35476
68%
**67
97%
[Accurate 2460]*
<<locked>>
96%
37130
71%
**96
92%
[Accurate 2495]*
<<locked>>
96%
26281
51%
**88
94%
Alliant AR-Comp
<<locked>>
96%
31821
61%
**47
98%
Alliant Reloder-10x 👍
<<locked>>
97%
40016
77%
**52
99%
Alliant Reloder-7 👍
<<locked>>
93%
46238
89%
**78
100%
Baschieri & Pellagri 106
<<locked>>
96%
45266
87%
**42
97%
[Hodgdon Benchmark]*
<<locked>>
97%
38508
74%
**57
91%
[Hodgdon CFE BLK]*
<<locked>>
93%
46224
89%
**29
93%
Hodgdon H322
<<locked>>
97%
36941
71%
**96
95%
Hodgdon H335
<<locked>>
97%
43584
84%
**08
95%
Hodgdon H4198
<<locked>>
94%
46717
90%
**46
97%
IMR 4198 👍
<<locked>>
96%
42815
82%
**39
100%
IMR 4227
<<locked>>
87%
45832
88%
**23
100%
[Lovex D073.4]*
<<locked>>
96%
39885
77%
**23
92%
Lovex S053
<<locked>>
89%
45992
88%
**10
100%
Norma 200 👍
<<locked>>
96%
44701
86%
**08
100%
ReloadSwiss RS 36
<<locked>>
88%
45774
88%
**59
100%
[ReloadSwiss RS 40]*
<<locked>>
97%
40118
77%
**33
93%
[Rottweil R 901]*
<<locked>>
96%
34084
66%
**31
92%
SNPE Vectan BA6 1/2
<<locked>>
92%
46006
88%
**82
100%
SNPE Vectan SP 10
<<locked>>
97%
44005
85%
**15
96%
[SNPE Vectan Tubal 3000]*
<<locked>>
96%
34026
65%
**75
92%
[Somchem S335]*
<<locked>>
96%
32242
62%
**72
93%
Vihtavuori N120
<<locked>>
96%
44353
85%
**42
100%
Vihtavuori N130
<<locked>>
96%
37956
73%
**67
98%
Vihtavuori N133
<<locked>>
97%
31618
61%
**52
95%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
29950
58%
**49
99%
[ADI AR 2219]*
<<locked>>
81%
27195
52%
**86
90%
Accurate 1680
<<locked>>
81%
39508
76%
**67
97%
[Accurate 2015]*
<<locked>>
81%
22278
43%
**78
91%
[Accurate 2460]*
<<locked>>
94%
33982
65%
**41
90%
[Accurate 2495]*
<<locked>>
89%
20900
40%
**41
90%
[Alliant AR-Comp]*
<<locked>>
81%
20436
39%
**39
91%
[Alliant Reloder-10x]*
<<locked>>
81%
24889
48%
**54
94%
Alliant Reloder-7
<<locked>>
81%
32097
62%
**52
97%
[Baschieri & Pellagri 106]*
<<locked>>
81%
28065
54%
**44
92%
[Hodgdon Benchmark]*
<<locked>>
94%
35389
68%
**01
90%
[Hodgdon CFE BLK]*
<<locked>>
86%
37898
73%
**01
90%
[Hodgdon H322]*
<<locked>>
87%
27586
53%
**00
90%
[Hodgdon H335]*
<<locked>>
85%
30066
58%
**59
90%
[Hodgdon H4198]*
<<locked>>
81%
31256
60%
**83
92%
IMR 4198
<<locked>>
81%
28108
54%
**64
96%
IMR 4227
<<locked>>
81%
38159
73%
**08
100%
[Lovex D073.4]*
<<locked>>
92%
34011
65%
**24
90%
Lovex S053
<<locked>>
81%
37086
71%
**82
100%
Norma 200
<<locked>>
81%
28108
54%
**19
97%
ReloadSwiss RS 36
<<locked>>
81%
37130
71%
**31
100%
[ReloadSwiss RS 40]*
<<locked>>
90%
32503
63%
**95
90%
[Rottweil R 901]*
<<locked>>
91%
29370
56%
**32
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
34751
67%
**41
100%
[SNPE Vectan SP 10]*
<<locked>>
85%
30269
58%
**69
91%
[SNPE Vectan Tubal 3000]*
<<locked>>
91%
29298
56%
**80
90%
[Somchem S335]*
<<locked>>
89%
26194
50%
**44
90%
Vihtavuori N120
<<locked>>
81%
28703
55%
**93
100%
[Vihtavuori N130]*
<<locked>>
81%
23888
46%
**78
93%
[Vihtavuori N133]*
<<locked>>
85%
23061
44%
**45
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page