
Load Specifications
Load data in caliber .33 Win. with .338 | 180gr | Ferrobull Entox Sport bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Alliant AR-Comp and Accurate 2015.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 92% | 38,856 psi | 88% | 2438 fps | 99.1% |
| Accurate 2460 | <<locked>> | 90% | 39,871 psi | 90% | 2477 fps | 96.9% |
| Accurate 2495ᴾ | <<locked>> | 100% | 37,782 psi | 85% | 2497 fps | 99.3% |
| Accurate 2520 | <<locked>> | 94% | 39,682 psi | 90% | 2513 fps | 96.4% |
| Accurate 4064ᴾ | <<locked>> | 100% | 35,230 psi | 80% | 2461 fps | 96.6% |
| Accurate LT-30 | <<locked>> | 82% | 38,000 psi | 86% | 2329 fps | 97.8% |
| Accurate LT-32 | <<locked>> | 82% | 38,406 psi | 87% | 2336 fps | 95.9% |
| ADI AR 2207 | <<locked>> | 82% | 39,653 psi | 90% | 2425 fps | 100% |
| ADI AR 2219 | <<locked>> | 86% | 39,972 psi | 90% | 2493 fps | 98.1% |
| Alliant AR-Comp | <<locked>> | 94% | 38,305 psi | 87% | 2510 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 88% | 39,726 psi | 90% | 2467 fps | 99.8% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 38,493 psi | 87% | 2365 fps | 98.2% |
| Hodgdon H322 | <<locked>> | 88% | 38,856 psi | 88% | 2474 fps | 97.9% |
| Hodgdon H335 | <<locked>> | 88% | 39,291 psi | 89% | 2484 fps | 97% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,865 psi | 72% | 1562 fps | 100% |
| IMR 3031 | <<locked>> | 96% | 38,986 psi | 88% | 2536 fps | 98.7% |
| IMR 4198 | <<locked>> | 86% | 39,595 psi | 90% | 2415 fps | 100% |
| Lovex D073.6 | <<locked>> | 96% | 37,434 psi | 85% | 2484 fps | 95.8% |
| Norma 200 | <<locked>> | 84% | 39,755 psi | 90% | 2451 fps | 99.9% |
| Norma 202 | <<locked>> | 96% | 39,479 psi | 89% | 2490 fps | 97.1% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,662 psi | 72% | 1598 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 23,177 psi | 52% | 1421 fps | 100% |
| Rottweil R 901 | <<locked>> | 92% | 38,537 psi | 87% | 2438 fps | 96.6% |
| Shooters World Match Rifle | <<locked>> | 96% | 37,434 psi | 85% | 2484 fps | 95.8% |
| SNPE Vectan SP 10 | <<locked>> | 84% | 37,826 psi | 86% | 2448 fps | 96.5% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 38,464 psi | 87% | 2431 fps | 98.5% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 38,145 psi | 86% | 2372 fps | 96.5% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 39,102 psi | 88% | 2408 fps | 97.8% |
| Somchem S335 | <<locked>> | 94% | 39,131 psi | 88% | 2418 fps | 97.7% |
| Vihtavuori N120 | <<locked>> | 82% | 39,871 psi | 90% | 2385 fps | 100% |
| Vihtavuori N130 | <<locked>> | 88% | 38,218 psi | 86% | 2382 fps | 99.5% |
| Vihtavuori N133 | <<locked>> | 92% | 37,608 psi | 85% | 2382 fps | 98.8% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 39,885 psi | 90% | 2513 fps | 99.5% |
| Vihtavuori N140 | <<locked>> | 96% | 37,637 psi | 85% | 2431 fps | 96.9% |
| Vihtavuori N540 | <<locked>> | 98% | 38,580 psi | 87% | 2464 fps | 96.6% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | 35.4 gr | 80% | 26,397 psi | 60% | 2162 fps | 95.6% |
| Accurate 2460 | <<locked>> | 86% | 34,592 psi | 78% | 2372 fps | 95.3% |
| Accurate 2495 | <<locked>> | 88% | 24,961 psi | 56% | 2208 fps | 95.5% |
| Accurate 2520 | <<locked>> | 92% | 36,854 psi | 83% | 2457 fps | 95.6% |
| Accurate 4064 | <<locked>> | 96% | 30,864 psi | 70% | 2365 fps | 95.1% |
| Accurate LT-30 | <<locked>> | 80% | 35,694 psi | 81% | 2287 fps | 97.2% |
| Accurate LT-32 | <<locked>> | 80% | 36,085 psi | 82% | 2290 fps | 95.1% |
| ADI AR 2207 | <<locked>> | 80% | 37,101 psi | 84% | 2379 fps | 100% |
| ADI AR 2219 | <<locked>> | 80% | 32,793 psi | 74% | 2343 fps | 96% |
| Alliant AR-Comp | 35.8 gr | 80% | 24,439 psi | 55% | 2172 fps | 97.2% |
| Alliant Reloder-10x | <<locked>> | 80% | 31,024 psi | 70% | 2287 fps | 98.4% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 33,765 psi | 76% | 2270 fps | 96.9% |
| Hodgdon H322 | <<locked>> | 82% | 31,894 psi | 72% | 2320 fps | 95.7% |
| Hodgdon H335 | <<locked>> | 84% | 34,461 psi | 78% | 2385 fps | 95.5% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,409 psi | 53% | 1394 fps | 100% |
| IMR 3031 | 38.5 gr | 86% | 28,355 psi | 64% | 2287 fps | 95.1% |
| IMR 4198 | <<locked>> | 80% | 33,069 psi | 75% | 2283 fps | 99.4% |
| Lovex D073.6 | <<locked>> | 94% | 35,027 psi | 79% | 2434 fps | 95% |
| Norma 200 | <<locked>> | 80% | 34,737 psi | 79% | 2352 fps | 99.5% |
| Norma 202 | <<locked>> | 92% | 34,766 psi | 79% | 2398 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,134 psi | 52% | 1424 fps | 100% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 17,056 psi | 39% | 1266 fps | 100% |
| Rottweil R 901 | <<locked>> | 88% | 34,026 psi | 77% | 2343 fps | 95.1% |
| Shooters World Match Rifle | <<locked>> | 94% | 35,027 psi | 79% | 2434 fps | 95% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 35,331 psi | 80% | 2395 fps | 95.7% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 31,604 psi | 71% | 2287 fps | 96.7% |
| SNPE Vectan Tubal 3000 | <<locked>> | 88% | 33,518 psi | 76% | 2277 fps | 95% |
| SNPE Vectan Tubal 5000 | <<locked>> | 92% | 30,574 psi | 69% | 2231 fps | 95.1% |
| Somchem S335 | <<locked>> | 86% | 30,589 psi | 69% | 2238 fps | 95.1% |
| Vihtavuori N120 | <<locked>> | 80% | 37,347 psi | 84% | 2343 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 29,791 psi | 67% | 2205 fps | 97.7% |
| Vihtavuori N133 | <<locked>> | 82% | 27,586 psi | 62% | 2159 fps | 95.8% |
| Vihtavuori N135 | <<locked>> | 86% | 25,657 psi | 58% | 2188 fps | 95.3% |
| Vihtavuori N140 | <<locked>> | 92% | 33,025 psi | 75% | 2333 fps | 95.4% |
| Vihtavuori N540 | <<locked>> | 94% | 33,881 psi | 77% | 2369 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for .33 Win. loaded with the .338 | 180gr | Ferrobull Entox Sport. IMR 3031 delivers the highest muzzle velocity at 2,536 fps; across all powders the maximum-charge window runs from 1,421 fps to 2,536 fps. Accurate 2495 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (305 MPa), the top charges use 52–90 %, leaving at least 10 % headroom. The 180.0 gr projectile in 0.338" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Alliant AR-Comp, Accurate 2015 rank at the top here: for .33 Win. with the .338 | 180gr | Ferrobull Entox Sport they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.