
Load Specifications
Load data in caliber .32 Win. Spec. with .323 | 108gr | Norma FMJ RN bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N120, ADI AR 2207 and Lovex S053.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI AR 2205 | <<locked>> | 82% | 39,233 psi | 89% | 2566 fps | 98.9% |
| ADI AR 2207 | <<locked>> | 98% | 38,841 psi | 88% | 2746 fps | 97.1% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 27,978 psi | 63% | 1729 fps | 100% |
| IMR 4227 | <<locked>> | 90% | 39,842 psi | 90% | 2654 fps | 95.9% |
| Lovex S053 | <<locked>> | 90% | 38,058 psi | 86% | 2635 fps | 98.6% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 27,209 psi | 62% | 1765 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 94% | 39,827 psi | 90% | 2566 fps | 100% |
| Vihtavuori N110 | <<locked>> | 84% | 37,913 psi | 86% | 2592 fps | 100% |
| Vihtavuori N120 | <<locked>> | 98% | 39,276 psi | 89% | 2720 fps | 98.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI AR 2205 | <<locked>> | 80% | 36,840 psi | 83% | 2513 fps | 98.4% |
| ADI AR 2207 | 30.4 gr | 92% | 32,401 psi | 73% | 2592 fps | 95% |
| Hodgdon TrailBoss | <<locked>> | 80% | 20,320 psi | 46% | 1542 fps | 100% |
| IMR 4227 | <<locked>> | 88% | 37,681 psi | 85% | 2608 fps | 95.2% |
| Lovex S053 | 25.3 gr | 80% | 28,384 psi | 64% | 2395 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 19,885 psi | 45% | 1578 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 27,224 psi | 62% | 2297 fps | 100% |
| Vihtavuori N110 | <<locked>> | 80% | 33,736 psi | 76% | 2507 fps | 100% |
| Vihtavuori N120 | 29.1 gr | 88% | 29,225 psi | 66% | 2474 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 9 powders for .32 Win. Spec. loaded with the .323 | 108gr | Norma FMJ RN. ADI AR 2207 delivers the highest muzzle velocity at 2,746 fps; across all powders the maximum-charge window runs from 1,729 fps to 2,746 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (305 MPa), the top charges use 62–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N120, ADI AR 2207, Lovex S053 rank at the top here: for .32 Win. Spec. with the .323 | 108gr | Norma FMJ RN they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.