Load data for .32 Win. Spec. + .321 | 170gr | Speer FN

Recommended Powder(s): ADI AR 2207, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.321 \| 170gr \| Speer FN
Manufacturer SKU:	2259
Bullet Weight:	170gr \| 11.0g
Bullet Diameter:	0.321" \| 8.15mm
Bullet Length:	<<locked>>
Caliber:	.32 Win. Spec. load data
Case Length (l3):	2.040" \| 51.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	44237 psi \| 3050 bar
LID:	LID_B6186_C421
Last updated:	2025-02-02

Load data for 0 loads in caliber .32 Win. Spec. with .321 | 170gr | Speer FN bullet and 0 powders such as ADI AR 2207, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
Muzzle velocity vs. barrel length
Every 1 inch additional barrel length increases muzzle velocity by approx. 20.5 fps
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	39740	90%	**47	100%
ADI AR 2219	<<locked>>	90%	39218	89%	**74	96%
Accurate 2015	<<locked>>	97%	39697	90%	**70	98%
[Accurate 2460]*	<<locked>>	94%	38638	87%	**54	93%
Accurate 2495	<<locked>>	97%	30356	69%	**95	96%
[Accurate 2520]*	<<locked>>	96%	33605	76%	**08	92%
Alliant AR-Comp 👍	<<locked>>	97%	35259	80%	**54	99%
Alliant Reloder-10x 👍	<<locked>>	93%	39581	89%	**77	99%
Alliant Reloder-7	<<locked>>	85%	39218	89%	**08	99%
Baschieri & Pellagri 106	<<locked>>	89%	38972	88%	**82	97%
[Hodgdon Benchmark]*	<<locked>>	94%	38957	88%	**01	92%
[Hodgdon CFE BLK]*	<<locked>>	85%	39813	90%	**69	92%
Hodgdon H322	<<locked>>	96%	39711	90%	**83	96%
Hodgdon H335	<<locked>>	91%	39769	90%	**90	95%
Hodgdon H4198	<<locked>>	86%	39102	88%	**62	96%
[IMR 3031]*	<<locked>>	97%	30821	70%	**52	94%
IMR 4198 👍	<<locked>>	90%	39131	88%	**15	99%
[Lovex D073.4]*	<<locked>>	93%	39798	90%	**57	93%
[Lovex D073.5]*	<<locked>>	95%	39175	89%	**60	93%
Norma 200 👍	<<locked>>	89%	39305	89%	**60	99%
[Norma 202]*	<<locked>>	97%	34185	77%	**92	93%
[ReloadSwiss RS 40]*	<<locked>>	93%	38682	87%	**44	93%
[Rottweil R 901]*	<<locked>>	97%	38014	86%	**31	94%
SNPE Vectan BA6 1/2	<<locked>>	83%	39581	89%	**24	100%
SNPE Vectan SP 10	<<locked>>	91%	39726	90%	**87	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	38218	86%	**75	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	30777	70%	**37	93%
[Somchem S321]*	<<locked>>	96%	39407	89%	**83	92%
Somchem S335	<<locked>>	97%	35839	81%	**69	95%
Vihtavuori N120	<<locked>>	89%	39595	90%	**05	100%
Vihtavuori N130	<<locked>>	94%	38682	87%	**05	99%
Vihtavuori N133	<<locked>>	97%	34214	77%	**29	96%
[Vihtavuori N140]*	<<locked>>	96%	31792	72%	**13	92%
[Vihtavuori N530]*	<<locked>>	96%	39073	88%	**57	92%
[Vihtavuori N540]*	<<locked>>	97%	31604	71%	**36	92%
[Winchester 748]*	<<locked>>	96%	39117	88%	**87	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32880	74%	**29	100%
[ADI AR 2219]*	<<locked>>	81%	29254	66%	**60	92%
[Accurate 2015]*	<<locked>>	81%	24352	55%	**46	93%
[Accurate 2460]*	<<locked>>	89%	32416	73%	**33	90%
[Accurate 2495]*	<<locked>>	85%	20769	47%	**36	90%
[Accurate 2520]*	<<locked>>	94%	30487	69%	**42	90%
[Alliant AR-Comp]*	<<locked>>	81%	22191	50%	**13	93%
Alliant Reloder-10x	<<locked>>	81%	27528	62%	**31	96%
Alliant Reloder-7	<<locked>>	81%	34925	79%	**29	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30472	69%	**18	94%
[Hodgdon Benchmark]*	<<locked>>	90%	33750	76%	**96	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	36535	83%	**10	90%
[Hodgdon H322]*	<<locked>>	83%	26600	60%	**95	90%
[Hodgdon H335]*	<<locked>>	81%	28442	64%	**47	90%
[Hodgdon H4198]*	<<locked>>	81%	33823	76%	**67	94%
[IMR 3031]*	<<locked>>	90%	25396	57%	**05	90%
IMR 4198	<<locked>>	81%	29849	67%	**28	97%
[Lovex D073.4]*	<<locked>>	88%	33054	75%	**36	90%
[Lovex D073.5]*	<<locked>>	90%	32706	74%	**42	90%
Norma 200	<<locked>>	81%	30980	70%	**00	98%
[Norma 202]*	<<locked>>	90%	27963	63%	**51	90%
[ReloadSwiss RS 40]*	<<locked>>	87%	31691	72%	**06	90%
[Rottweil R 901]*	<<locked>>	87%	28427	64%	**31	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37173	84%	**91	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	28993	66%	**64	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	27949	63%	**72	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	26498	60%	**39	90%
[Somchem S321]*	<<locked>>	93%	35331	80%	**05	90%
[Somchem S335]*	<<locked>>	85%	25469	58%	**36	90%
Vihtavuori N120	<<locked>>	81%	30966	70%	**54	100%
Vihtavuori N130	<<locked>>	81%	26237	59%	**49	95%
[Vihtavuori N133]*	<<locked>>	81%	22234	50%	**31	90%
[Vihtavuori N140]*	<<locked>>	92%	27702	63%	**14	90%
[Vihtavuori N530]*	<<locked>>	93%	35752	81%	**92	90%
[Vihtavuori N540]*	<<locked>>	94%	29283	66%	**77	90%
[Winchester 748]*	<<locked>>	93%	34882	79%	**01	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data