top of page

Load data for .32 Win. Spec. + .321 | 170gr | Remington SP Core-Lokt

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.32 Win. Spec. + .321 | 170gr | Remington SP Core-Lokt

Load Specifications

Bullet:
.321 | 170gr | Remington SP Core-Lokt
Bullet Weight:
170gr | 11.0g
Bullet Diameter:
0.321" | 8.15mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.32 Win. Spec.
Case Length (l3):
2.040" | 51.8mm
Cartridge Length (C.O.L.):
2.527" | 64.2mm
Seated Depth:
0.513" | 13.0mm
Shank Seated Depth:
0.513" | 13.0mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
44237 psi | 3050 bar
LID:
LID_B5182_C421

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .32 Win. Spec. with .321 | 170gr | Remington SP Core-Lokt bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
88%
39726
90%
**31
100%
ADI AR 2219
<<locked>>
91%
39030
88%
**51
96%
Accurate 2015
<<locked>>
96%
37681
85%
**15
98%
[Accurate 2460]*
<<locked>>
96%
38493
87%
**31
92%
Accurate 2495
<<locked>>
97%
28834
65%
**46
95%
Alliant AR-Comp 👍
<<locked>>
96%
33721
76%
**98
99%
Alliant Reloder-10x 👍
<<locked>>
95%
39769
90%
**64
99%
Alliant Reloder-7
<<locked>>
86%
39204
89%
**88
99%
Baschieri & Pellagri 106
<<locked>>
90%
39102
88%
**65
96%
[Hodgdon Benchmark]*
<<locked>>
96%
38783
88%
**75
92%
Hodgdon H322
<<locked>>
97%
39030
88%
**51
96%
[Hodgdon H335]*
<<locked>>
92%
38783
88%
**47
94%
Hodgdon H4198
<<locked>>
87%
39363
89%
**49
95%
[IMR 3031]*
<<locked>>
97%
29312
66%
**96
93%
IMR 4198
<<locked>>
91%
38667
87%
**85
99%
[Lovex D073.4]*
<<locked>>
94%
38421
87%
**11
92%
[Lovex D073.5]*
<<locked>>
96%
39044
88%
**41
92%
Norma 200 👍
<<locked>>
90%
38957
88%
**34
99%
[Norma 202]*
<<locked>>
97%
32779
74%
**39
92%
[ReloadSwiss RS 40]*
<<locked>>
94%
38798
88%
**28
93%
[Rottweil R 901]*
<<locked>>
96%
36071
82%
**78
93%
SNPE Vectan BA6 1/2
<<locked>>
85%
39755
90%
**14
100%
[SNPE Vectan SP 10]*
<<locked>>
91%
38711
87%
**44
94%
[SNPE Vectan Tubal 3000]*
<<locked>>
96%
36129
82%
**23
93%
[Somchem S335]*
<<locked>>
97%
34766
79%
**23
94%
Vihtavuori N120
<<locked>>
90%
39581
89%
**88
100%
Vihtavuori N130
<<locked>>
95%
38914
88%
**88
98%
Vihtavuori N133
<<locked>>
97%
33373
75%
**93
96%
[Vihtavuori N140]*
<<locked>>
97%
31343
71%
**80
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
31720
72%
**90
100%
[ADI AR 2219]*
<<locked>>
81%
28065
63%
**14
91%
[Accurate 2015]*
<<locked>>
81%
23395
53%
**03
92%
[Accurate 2460]*
<<locked>>
91%
33025
75%
**33
90%
[Accurate 2495]*
<<locked>>
87%
20769
47%
**29
90%
[Alliant AR-Comp]*
<<locked>>
81%
21524
49%
**70
92%
Alliant Reloder-10x
<<locked>>
81%
26411
60%
**91
95%
Alliant Reloder-7
<<locked>>
81%
33852
77%
**90
98%
[Baschieri & Pellagri 106]*
<<locked>>
81%
29428
67%
**75
93%
[Hodgdon Benchmark]*
<<locked>>
93%
35752
81%
**19
91%
[Hodgdon H322]*
<<locked>>
85%
27383
62%
**95
90%
[Hodgdon H335]*
<<locked>>
84%
29762
67%
**60
90%
[Hodgdon H4198]*
<<locked>>
81%
32750
74%
**21
93%
[IMR 3031]*
<<locked>>
92%
26020
59%
**08
90%
IMR 4198
<<locked>>
81%
29414
66%
**98
97%
[Lovex D073.4]*
<<locked>>
90%
34026
77%
**36
90%
[Lovex D073.5]*
<<locked>>
92%
33562
76%
**39
90%
Norma 200
<<locked>>
81%
29356
66%
**47
97%
[Norma 202]*
<<locked>>
93%
29109
66%
**57
90%
[ReloadSwiss RS 40]*
<<locked>>
88%
32213
73%
**96
90%
[Rottweil R 901]*
<<locked>>
89%
29196
66%
**34
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
36289
82%
**65
100%
[SNPE Vectan SP 10]*
<<locked>>
83%
29718
67%
**60
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
89%
28921
65%
**75
90%
[Somchem S335]*
<<locked>>
88%
26513
60%
**46
90%
Vihtavuori N120
<<locked>>
81%
29646
67%
**14
100%
[Vihtavuori N130]*
<<locked>>
81%
25222
57%
**06
94%
[Vihtavuori N133]*
<<locked>>
84%
23308
53%
**50
90%
[Vihtavuori N140]*
<<locked>>
94%
28703
65%
**21
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page