top of page

Load data for .32 Win. Spec. + .321 | 148gr | H&N KS F

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.32 Win. Spec. + .321 | 148gr | H&N KS F

Load Specifications

Bullet:
.321 | 148gr | H&N KS F
Bullet Weight:
148gr | 9.6g
Bullet Diameter:
0.321" | 8.15mm
Bullet Length:
0.827" | 21.0mm
Caliber:
.32 Win. Spec.
Case Length (l3):
2.040" | 51.8mm
Cartridge Length (C.O.L.):
2.527" | 64.2mm
Seated Depth:
0.340" | 8.6mm
Shank Seated Depth:
0.340" | 8.6mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
44237 psi | 3050 bar
LID:
LID_B7427_C421

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .32 Win. Spec. with .321 | 148gr | H&N KS F bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 6.6 fps

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
91%
38943
88%
**57
100%
ADI AR 2219
<<locked>>
95%
39639
90%
**87
95%
Accurate 2015
<<locked>>
97%
32982
75%
**56
96%
Alliant AR-Comp
<<locked>>
96%
29776
67%
**26
96%
Alliant Reloder-10x
<<locked>>
96%
36796
83%
**41
98%
Alliant Reloder-7 👍
<<locked>>
90%
39392
89%
**28
99%
Baschieri & Pellagri 106
<<locked>>
93%
39247
89%
**82
95%
[Hodgdon H322]*
<<locked>>
97%
34737
79%
**85
93%
[Hodgdon H335]*
<<locked>>
95%
38914
88%
**77
93%
Hodgdon H4198
<<locked>>
90%
39552
89%
**72
95%
IMR 4198 👍
<<locked>>
95%
39291
89%
**28
99%
IMR 4227
<<locked>>
84%
39204
89%
**65
100%
Lovex S053
<<locked>>
85%
39088
88%
**62
100%
Norma 200 👍
<<locked>>
94%
39189
89%
**84
99%
ReloadSwiss RS 36
<<locked>>
85%
38972
88%
**05
99%
[ReloadSwiss RS 40]*
<<locked>>
97%
37565
85%
**28
91%
SNPE Vectan BA6 1/2
<<locked>>
87%
39160
89%
**34
100%
[SNPE Vectan SP 10]*
<<locked>>
94%
38972
88%
**74
93%
Vihtavuori N120 👍
<<locked>>
93%
38914
88%
**15
100%
Vihtavuori N130
<<locked>>
97%
36230
82%
**72
97%
[Vihtavuori N133]*
<<locked>>
96%
28892
65%
**08
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
27485
62%
**18
98%
[ADI AR 2219]*
<<locked>>
86%
29602
67%
**64
90%
[Accurate 2015]*
<<locked>>
86%
22597
51%
**93
90%
[Alliant AR-Comp]*
<<locked>>
86%
21393
48%
**67
91%
[Alliant Reloder-10x]*
<<locked>>
81%
22220
50%
**87
91%
Alliant Reloder-7
<<locked>>
81%
29124
66%
**15
96%
[Baschieri & Pellagri 106]*
<<locked>>
82%
26716
60%
**10
90%
[Hodgdon H322]*
<<locked>>
91%
29037
66%
**47
90%
[Hodgdon H335]*
<<locked>>
89%
31749
72%
**20
90%
[Hodgdon H4198]*
<<locked>>
81%
29341
66%
**56
90%
[IMR 4198]*
<<locked>>
81%
25846
58%
**19
94%
IMR 4227
<<locked>>
81%
35766
81%
**03
99%
Lovex S053
<<locked>>
81%
34563
78%
**77
100%
[Norma 200]*
<<locked>>
81%
24395
55%
**49
94%
ReloadSwiss RS 36
<<locked>>
81%
34505
78%
**23
99%
[ReloadSwiss RS 40]*
<<locked>>
94%
34490
78%
**59
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
32547
74%
**26
100%
[SNPE Vectan SP 10]*
<<locked>>
89%
31850
72%
**23
90%
Vihtavuori N120
<<locked>>
81%
25976
59%
**52
99%
[Vihtavuori N130]*
<<locked>>
81%
21466
49%
**05
90%
[Vihtavuori N133]*
<<locked>>
91%
24976
56%
**00
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page