Load data for .32 Short Colt + .312 | 60gr | Hornady XTP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.312 \| 60gr \| Hornady XTP
Manufacturer SKU:	32010
Bullet Weight:	60gr \| 3.9g
Bullet Diameter:	0.312" \| 7.92mm
Bullet Length:	<<locked>>
Caliber:	.32 Short Colt load data
Case Length (l3):	0.650" \| 16.5mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	6.8 Grains of Water \| 0.44 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	14504 psi \| 1000 bar
LID:	LID_B2726_C419
Last updated:	2026-02-04

Load data for 42 loads in caliber .32 Short Colt with .312 | 60gr | Hornady XTP bullet and 21 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	74%	12430	86%	**01	83%
ADI APS 450	<<locked>>	65%	12227	84%	**6	99%
ADI AS 30	<<locked>>	77%	12792	88%	**1	96%
ADI AS 50N	<<locked>>	74%	12792	88%	**5	90%
Accurate Solo 1000	<<locked>>	71%	12357	85%	**2	90%
[Alliant BE-86]*	<<locked>>	90%	12763	88%	**07	86%
[Baschieri & Pellagri 100]*	<<locked>>	82%	13053	90%	**1	88%
[Baschieri & Pellagri 102 Pistol]*	<<locked>>	96%	9964	69%	**6	85%
[Baschieri & Pellagri 103 Pistol]*	<<locked>>	82%	12981	89%	**07	89%
[Hodgdon Universal]*	<<locked>>	82%	12430	86%	**01	83%
[Lovex S011]*	<<locked>>	64%	12372	85%	**5	83%
[Maxam CSB 2]*	<<locked>>	96%	11647	80%	**33	88%
[Maxam CSB 3]*	<<locked>>	82%	12154	84%	**1	87%
Maxam CSB 4	<<locked>>	80%	12952	89%	**4	92%
Maxam CSB 5	<<locked>>	73%	12270	85%	**8	98%
ReloadSwiss RS 12	<<locked>>	87%	12473	86%	**83	93%
Rottweil P 801	<<locked>>	78%	12647	87%	**63	96%
Vihtavuori N310	<<locked>>	65%	12662	87%	**1	100%
Vihtavuori N320	<<locked>>	83%	12676	87%	**10	92%
Vihtavuori N32C Tin Star	<<locked>>	94%	8296	57%	**6	94%
[Winchester 231]*	<<locked>>	67%	12763	88%	**5	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	71%	11647	80%	**1	81%
[ADI APS 450]²	<<locked>>	58%	10240	71%	**0	98%
ADI AS 30	<<locked>>	62%	9137	63%	**7	91%
[ADI AS 50N]*	<<locked>>	61%	9123	63%	**7	83%
[Accurate Solo 1000]*	<<locked>>	61%	9587	66%	**3	85%
[Alliant BE-86]*	<<locked>>	79%	10008	69%	**6	80%
[Baschieri & Pellagri 100]*	<<locked>>	69%	9369	65%	**3	81%
[Baschieri & Pellagri 102 Pistol]*	<<locked>>	87%	8122	56%	**7	80%
[Baschieri & Pellagri 103 Pistol]*	<<locked>>	67%	8702	60%	**0	81%
[Hodgdon Universal]*	<<locked>>	79%	11647	80%	**1	81%
[Lovex S011]*	<<locked>>	61%	11211	77%	**3	81%
[Maxam CSB 2]*	<<locked>>	84%	8978	62%	**2	81%
[Maxam CSB 3]*	<<locked>>	69%	8949	62%	**0	80%
[Maxam CSB 4]*	<<locked>>	63%	8557	59%	**3	83%
Maxam CSB 5	<<locked>>	62%	9427	65%	**6	95%
[ReloadSwiss RS 12]*	<<locked>>	65%	7034	49%	**7	80%
[Rottweil P 801]*²	<<locked>>	59%	7527	52%	**3	87%
[Vihtavuori N310]²	<<locked>>	58%	10544	73%	**5	99%
[Vihtavuori N320]*	<<locked>>	67%	8499	59%	**0	83%
Vihtavuori N32C Tin Star	<<locked>>	91%	7644	53%	**3	92%
[Winchester 231]*	<<locked>>	62%	11110	77%	**2	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data