
Load Specifications
Load data in caliber .32 Short Colt with .309 | 71gr | H&N RN HS bullet and 12 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 64% | 12,183 psi | 84% | 715 fps | 99.6% |
| ADI APS 450² | <<locked>> | 68% | 12,691 psi | 88% | 741 fps | 98.6% |
| ADI AS 30*² | <<locked>> | 76% | 12,488 psi | 86% | 778 fps | 94% |
| ADI AS 50N*² | <<locked>> | 76% | 12,836 psi | 89% | 794 fps | 87.4% |
| Alliant RED DOT* | <<locked>> | 80% | 12,082 psi | 83% | 781 fps | 92.6% |
| Hodgdon Clays² | <<locked>> | 72% | 11,748 psi | 81% | 722 fps | 97.6% |
| Maxam CSB 4* | <<locked>> | 80% | 12,691 psi | 88% | 791 fps | 88.7% |
| Maxam CSB 5² | <<locked>> | 72% | 12,415 psi | 86% | 787 fps | 96.5% |
| Rottweil P 801* | <<locked>> | 80% | 12,778 psi | 88% | 850 fps | 93.6% |
| SNPE Vectan BA10² | <<locked>> | 64% | 12,676 psi | 87% | 741 fps | 98.6% |
| Vihtavuori N320* | <<locked>> | 84% | 12,981 psi | 90% | 823 fps | 89.1% |
| Vihtavuori N32C Tin Star*ᴾ | <<locked>> | 100% | 6,933 psi | 48% | 643 fps | 86.4% |
Start Load - Barrel Length: 3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 60% | 10,472 psi | 72% | 673 fps | 98.7% |
| ADI APS 450² | <<locked>> | 60% | 11,110 psi | 77% | 702 fps | 97.3% |
| ADI AS 30*² | <<locked>> | 64% | 8,441 psi | 58% | 659 fps | 87.1% |
| ADI AS 50N*² | <<locked>> | 72% | 11,458 psi | 79% | 755 fps | 85.2% |
| Alliant RED DOT*² | <<locked>> | 68% | 9,297 psi | 64% | 702 fps | 87.9% |
| Hodgdon Clays*² | <<locked>> | 60% | 7,702 psi | 53% | 604 fps | 91.6% |
| Maxam CSB 4*² | <<locked>> | 76% | 11,255 psi | 78% | 755 fps | 86.3% |
| Maxam CSB 5*² | <<locked>> | 60% | 8,282 psi | 57% | 666 fps | 89.7% |
| Rottweil P 801*² | <<locked>> | 68% | 8,963 psi | 62% | 741 fps | 87% |
| SNPE Vectan BA10² | <<locked>> | 60% | 11,095 psi | 77% | 702 fps | 97.3% |
| Vihtavuori N320* | <<locked>> | 80% | 11,531 psi | 80% | 784 fps | 86.7% |
| Vihtavuori N32C Tin Star* | <<locked>> | 96% | 6,933 psi | 48% | 643 fps | 86.4% |
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 12 powders for .32 Short Colt loaded with the .309 | 71gr | H&N RN HS. Rottweil P 801 delivers the highest muzzle velocity at 850 fps; across all powders the maximum-charge window runs from 643 fps to 850 fps. Vihtavuori N32C Tin Star gives the best case fill at 100 %, and 5 of the 12 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (100 MPa), the top charges use 48–90 %, leaving at least 10 % headroom. Vihtavuori N32C Tin Star reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, ADI AS 30, ADI AS 50N, Alliant RED DOT burn incompletely and react more sensitively to barrel length and temperature. ADI APS 350, ADI APS 450, ADI AS 30 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.