Load Specifications
Load data in caliber .32 S&W with .313 | 75gr | Rim Rock FP Top Shelf bullet and 7 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 64% | 11,487 psi | 88% | 623 fps | 98.7% |
| ADI APS 450² | <<locked>> | 64% | 10,907 psi | 84% | 623 fps | 96% |
| ADI AS 30*² | <<locked>> | 72% | 10,269 psi | 79% | 636 fps | 89.1% |
| Alliant RED DOT* | <<locked>> | 80% | 11,385 psi | 87% | 682 fps | 90.2% |
| Hodgdon Clays² | <<locked>> | 64% | 11,400 psi | 87% | 627 fps | 97.8% |
| Maxam CSB 5*² | <<locked>> | 72% | 11,327 psi | 87% | 682 fps | 93.9% |
| Rottweil P 801*² | <<locked>> | 76% | 10,573 psi | 81% | 715 fps | 89% |
Start Load - Barrel Length: 3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 60% | 11,487 psi | 88% | 623 fps | 98.7% |
| ADI APS 450² | <<locked>> | 60% | 10,907 psi | 84% | 623 fps | 96% |
| ADI AS 30*² | <<locked>> | 64% | 8,847 psi | 68% | 594 fps | 86.2% |
| Alliant RED DOT*² | <<locked>> | 72% | 9,805 psi | 75% | 640 fps | 87.3% |
| Hodgdon Clays² | <<locked>> | 60% | 11,400 psi | 87% | 627 fps | 97.8% |
| Maxam CSB 5*² | <<locked>> | 60% | 8,340 psi | 64% | 594 fps | 88.1% |
| Rottweil P 801*² | <<locked>> | 68% | 9,311 psi | 71% | 679 fps | 86.4% |
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.