Load data for .32 S&W Long Wad Cut. + .312 | 60gr | Hornady XTP

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.312 \| 60gr \| Hornady XTP
Manufacturer SKU:	32010
Bullet Weight:	60gr \| 3.9g
Bullet Diameter:	0.312" \| 7.92mm
Bullet Length:	0.350" \| 8.9mm
Caliber:	.32 S&W Long Wad Cut. load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	0.985" \| 25.0mm
Seated Depth:	0.278" \| 7.1mm
Shank Seated Depth:	0.278" \| 7.1mm
Case Capacity:	14.8 Grains of Water \| 0.96 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	22481 psi \| 1550 bar
LID:	LID_B2726_C418
Last updated:	2025-01-01

Load data for 78 loads in caliber .32 S&W Long Wad Cut. with .312 | 60gr | Hornady XTP bullet and 39 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	65%	19072	85%	**85	98%
ADI APS 350	<<locked>>	63%	20088	89%	**14	100%
ADI APS 450	<<locked>>	65%	19363	86%	**43	100%
ADI AS 30	<<locked>>	69%	18971	84%	**93	100%
ADI AS 50N	<<locked>>	67%	18913	84%	**32	100%
[Accurate No. 2]*	<<locked>>	72%	19609	87%	**48	88%
Accurate Solo 1000	<<locked>>	70%	20204	90%	**39	100%
Accurate Solo 1250	<<locked>>	80%	20073	89%	**98	98%
Alliant BULLSEYE	<<locked>>	67%	18956	84%	**91	92%
Alliant UNIQUE	<<locked>>	80%	19290	86%	**17	91%
Baschieri & Pellagri 100	<<locked>>	74%	20030	89%	**48	100%
Hodgdon Clays	<<locked>>	63%	20088	89%	**34	100%
[Hodgdon Longshot]*	<<locked>>	64%	19348	86%	**04	83%
Hodgdon Universal	<<locked>>	72%	19072	85%	**85	98%
Hodgdon TrailBoss	<<locked>>	95%	8354	37%	**5	96%
Lovex S020	<<locked>>	74%	19667	87%	**11	94%
Maxam CSB 1	<<locked>>	81%	18942	84%	**62	97%
Maxam CSB 2	<<locked>>	82%	18927	84%	**24	100%
Maxam CSB 3	<<locked>>	74%	18855	84%	**52	100%
Maxam CSB 4	<<locked>>	72%	19667	87%	**58	100%
Maxam CSB 5	<<locked>>	65%	18971	84%	**93	100%
[Ramshot Silhouette]*	<<locked>>	65%	19160	85%	**91	88%
[Ramshot True Blue]*	<<locked>>	63%	20059	89%	**07	83%
ReloadSwiss RS 12	<<locked>>	72%	19711	88%	**37	100%
[ReloadSwiss RS 14]*	<<locked>>	93%	7237	32%	**5	89%
ReloadSwiss RS 20	<<locked>>	85%	19667	87%	**44	94%
Rottweil P 801	<<locked>>	63%	18927	84%	**71	100%
SNPE Vectan A0	<<locked>>	80%	19421	86%	**62	91%
SNPE Vectan BA 9	<<locked>>	72%	19377	86%	**52	95%
[SNPE Vectan BA7 1/2]*	<<locked>>	90%	20160	90%	**94	82%
SNPE Vectan BA9 1/2	<<locked>>	74%	19667	87%	**81	97%
Somchem MP200	<<locked>>	72%	19131	85%	**91	90%
Somchem MS200	<<locked>>	76%	19479	87%	**78	93%
[Vihtavuori 3N37]*	<<locked>>	85%	20146	90%	**47	84%
Vihtavuori N320	<<locked>>	73%	19537	87%	**81	100%
Vihtavuori N32C Tin Star	<<locked>>	96%	18391	82%	**96	100%
Vihtavuori N330	<<locked>>	76%	18913	84%	**17	98%
Vihtavuori N340	<<locked>>	78%	18710	83%	**75	91%
[Vihtavuori N350]*	<<locked>>	88%	19667	88%	**27	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	60%	16389	73%	**16	96%
[ADI APS 350]²	<<locked>>	59%	17999	80%	**75	100%
ADI APS 450	<<locked>>	61%	17608	78%	**01	100%
ADI AS 30	<<locked>>	62%	15983	71%	**11	100%
ADI AS 50N	<<locked>>	61%	16085	72%	**50	99%
[Accurate No. 2]*	<<locked>>	62%	13924	62%	**81	81%
Accurate Solo 1000	<<locked>>	61%	15577	69%	**14	99%
Accurate Solo 1250	<<locked>>	62%	12357	55%	**55	91%
[Alliant BULLSEYE]*	<<locked>>	62%	16375	73%	**06	89%
[Alliant UNIQUE]*	<<locked>>	61%	11516	51%	**38	81%
Baschieri & Pellagri 100	<<locked>>	62%	14489	64%	**94	97%
[Hodgdon Clays]²	<<locked>>	59%	18333	82%	**94	100%
[Hodgdon Longshot]*	<<locked>>	62%	18159	81%	**65	81%
Hodgdon Universal	<<locked>>	61%	14141	63%	**34	94%
[Hodgdon TrailBoss]*	<<locked>>	63%	4772	21%	**8	86%
[Lovex S020]*	<<locked>>	61%	13169	59%	**07	88%
[Maxam CSB 1]*	<<locked>>	60%	10805	48%	**83	88%
Maxam CSB 2	<<locked>>	61%	10414	46%	**42	94%
Maxam CSB 3	<<locked>>	62%	13402	60%	**84	96%
Maxam CSB 4	<<locked>>	60%	13967	62%	**94	99%
Maxam CSB 5	<<locked>>	62%	17114	76%	**53	100%
[Ramshot Silhouette]*	<<locked>>	61%	16563	74%	**12	86%
[Ramshot True Blue]*	<<locked>>	61%	19014	85%	**75	82%
ReloadSwiss RS 12	<<locked>>	61%	13982	62%	**73	99%
[ReloadSwiss RS 14]*	<<locked>>	72%	5221	23%	**4	82%
[ReloadSwiss RS 20]*	<<locked>>	61%	10254	46%	**93	80%
Rottweil P 801	<<locked>>	61%	17463	78%	**29	100%
[SNPE Vectan A0]*	<<locked>>	61%	11690	52%	**99	81%
SNPE Vectan BA 9	<<locked>>	61%	14359	64%	**98	91%
[SNPE Vectan BA7 1/2]*	<<locked>>	85%	17999	80%	**39	80%
SNPE Vectan BA9 1/2	<<locked>>	60%	13213	59%	**81	92%
[Somchem MP200]*	<<locked>>	60%	13445	60%	**98	83%
[Somchem MS200]*	<<locked>>	60%	12488	56%	**48	85%
[Vihtavuori 3N37]*	<<locked>>	81%	17767	79%	**71	81%
Vihtavuori N320	<<locked>>	60%	13576	60%	**14	99%
Vihtavuori N32C Tin Star	<<locked>>	60%	7745	34%	**1	99%
Vihtavuori N330	<<locked>>	60%	11473	51%	**65	91%
[Vihtavuori N340]*	<<locked>>	62%	11806	52%	**35	82%
[Vihtavuori N350]*	<<locked>>	83%	17521	78%	**52	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.