Load data for .32 S&W Long N.P. + .314 | 83gr | Lapua Lead Wadcutter

.32 S&W Long N.P. cartridge drawing
Lapua logo

Load Specifications

Bullet Manufacturer:Lapua
Bullet Weight:83 gr
Bullet Diameter:0.314"
Bullet Length:<<locked>>
Case Length (l3):0.9154"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:14.8 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:14,504 psi

Load data in caliber .32 S&W Long N.P. with .314 | 83gr | Lapua Lead Wadcutter bullet and 40 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss, Baschieri & Pellagri 102 Pistol and Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250*²<<locked>>72%12,937 psi89%853 fps90.1%
Accurate Solo 1250*²<<locked>>72%12,937 psi89%853 fps90.1%
ADI AS 30²<<locked>>64%12,865 psi89%817 fps99.7%
ADI AS 30²<<locked>>64%12,865 psi89%817 fps99.7%
Alliant BE-86*²<<locked>>68%11,182 psi77%817 fps91.1%
Alliant BE-86*²<<locked>>68%11,182 psi77%817 fps91.1%
Alliant Green Dot²<<locked>>64%12,749 psi88%833 fps96.4%
Alliant Green Dot²<<locked>>64%12,749 psi88%833 fps96.4%
Alliant RED DOT²<<locked>>64%12,647 psi87%830 fps99.4%
Alliant RED DOT²<<locked>>64%12,647 psi87%830 fps99.4%
Baschieri & Pellagri 100*²<<locked>>68%12,792 psi88%827 fps94.8%
Baschieri & Pellagri 100*²<<locked>>68%12,792 psi88%827 fps94.8%
Baschieri & Pellagri 102 Pistol<<locked>>88%12,705 psi88%866 fps97.1%
Baschieri & Pellagri 102 Pistol<<locked>>88%12,705 psi88%866 fps97.1%
Baschieri & Pellagri 103 Pistol²<<locked>>64%11,806 psi81%840 fps95%
Baschieri & Pellagri 103 Pistol²<<locked>>64%11,806 psi81%840 fps95%
Hodgdon Clays²<<locked>>64%13,082 psi90%781 fps100%
Hodgdon Clays²<<locked>>64%13,082 psi90%781 fps100%
Hodgdon TrailBoss*ᴾ<<locked>>100%6,643 psi46%653 fps91.3%
Hodgdon TrailBoss*ᴾ<<locked>>100%6,643 psi46%653 fps91.3%
Hodgdon Universal*²<<locked>>68%12,821 psi88%869 fps91.2%
Hodgdon Universal*²<<locked>>68%12,821 psi88%869 fps91.2%
Maxam CSB 1*²<<locked>>72%12,314 psi85%833 fps89.5%
Maxam CSB 1*²<<locked>>72%12,314 psi85%833 fps89.5%
Maxam CSB 2²<<locked>>76%12,067 psi83%889 fps95.6%
Maxam CSB 2²<<locked>>76%12,067 psi83%889 fps95.6%
Maxam CSB 3*²<<locked>>64%10,892 psi75%791 fps92.4%
Maxam CSB 3*²<<locked>>64%10,892 psi75%791 fps92.4%
Maxam CSB 4²<<locked>>64%12,618 psi87%833 fps97.2%
Maxam CSB 4²<<locked>>64%12,618 psi87%833 fps97.2%
ReloadSwiss RS 12²<<locked>>68%12,531 psi86%899 fps98.2%
ReloadSwiss RS 12²<<locked>>68%12,531 psi86%899 fps98.2%
SNPE Vectan BA9 1/2*²<<locked>>68%12,618 psi87%843 fps89.3%
SNPE Vectan BA9 1/2*²<<locked>>68%12,618 psi87%843 fps89.3%
Vihtavuori N320²<<locked>>68%12,836 psi89%863 fps97.7%
Vihtavuori N320²<<locked>>68%12,836 psi89%863 fps97.7%
Vihtavuori N32C Tin Starᴾ<<locked>>100%12,154 psi84%833 fps100%
Vihtavuori N32C Tin Starᴾ<<locked>>100%12,154 psi84%833 fps100%
Vihtavuori N330*²<<locked>>68%11,603 psi80%850 fps90.1%
Vihtavuori N330*²<<locked>>68%11,603 psi80%850 fps90.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250*²<<locked>>68%10,805 psi75%794 fps86.8%
Accurate Solo 1250*²<<locked>>68%10,805 psi75%794 fps86.8%
ADI AS 30²<<locked>>60%11,603 psi80%787 fps99.2%
ADI AS 30²<<locked>>60%11,603 psi80%787 fps99.2%
Alliant BE-86*²<<locked>>60%8,615 psi59%738 fps86.2%
Alliant BE-86*²<<locked>>60%8,615 psi59%738 fps86.2%
Alliant Green Dot*²<<locked>>60%10,515 psi73%771 fps93.7%
Alliant Green Dot*²<<locked>>60%10,515 psi73%771 fps93.7%
Alliant RED DOT²<<locked>>60%11,371 psi78%797 fps98.7%
Alliant RED DOT²<<locked>>60%11,371 psi78%797 fps98.7%
Baschieri & Pellagri 100*²<<locked>>60%10,559 psi73%768 fps91.9%
Baschieri & Pellagri 100*²<<locked>>60%10,559 psi73%768 fps91.9%
Baschieri & Pellagri 102 Pistol*²2.1 gr64%6,440 psi44%656 fps85.2%
Baschieri & Pellagri 102 Pistol*²2.1 gr64%6,440 psi44%656 fps85.2%
Baschieri & Pellagri 103 Pistol*²<<locked>>60%10,211 psi70%794 fps92.7%
Baschieri & Pellagri 103 Pistol*²<<locked>>60%10,211 psi70%794 fps92.7%
Hodgdon Clays²<<locked>>60%11,792 psi81%751 fps100%
Hodgdon Clays²<<locked>>60%11,792 psi81%751 fps100%
Hodgdon TrailBoss*1.7 gr92%5,366 psi37%597 fps87.1%
Hodgdon TrailBoss*1.7 gr92%5,366 psi37%597 fps87.1%
Hodgdon Universal*²<<locked>>60%9,834 psi68%778 fps86.3%
Hodgdon Universal*²<<locked>>60%9,834 psi68%778 fps86.3%
Maxam CSB 1*²<<locked>>68%10,312 psi71%774 fps86.1%
Maxam CSB 1*²<<locked>>68%10,312 psi71%774 fps86.1%
Maxam CSB 2*²<<locked>>64%8,296 psi57%768 fps89%
Maxam CSB 2*²<<locked>>64%8,296 psi57%768 fps89%
Maxam CSB 3*²<<locked>>60%9,877 psi68%758 fps90.7%
Maxam CSB 3*²<<locked>>60%9,877 psi68%758 fps90.7%
Maxam CSB 4²<<locked>>60%11,429 psi79%801 fps96%
Maxam CSB 4²<<locked>>60%11,429 psi79%801 fps96%
ReloadSwiss RS 12*²<<locked>>60%9,340 psi64%807 fps94.5%
ReloadSwiss RS 12*²<<locked>>60%9,340 psi64%807 fps94.5%
SNPE Vectan BA9 1/2*²<<locked>>64%11,603 psi80%814 fps87.8%
SNPE Vectan BA9 1/2*²<<locked>>64%11,603 psi80%814 fps87.8%
Vihtavuori N320²<<locked>>60%10,443 psi72%801 fps95.3%
Vihtavuori N320²<<locked>>60%10,443 psi72%801 fps95.3%
Vihtavuori N32C Tin Star*²1.5 gr60%4,395 psi30%558 fps88.6%
Vihtavuori N32C Tin Star*²1.5 gr60%4,395 psi30%558 fps88.6%
Vihtavuori N330*²<<locked>>64%10,617 psi73%820 fps88.3%
Vihtavuori N330*²<<locked>>64%10,617 psi73%820 fps88.3%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 40 powders for .32 S&W Long N.P. loaded with the .314 | 83gr | Lapua Lead Wadcutter. ReloadSwiss RS 12 delivers the highest muzzle velocity at 899 fps; across all powders the maximum-charge window runs from 653 fps to 899 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 40 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (100 MPa), the top charges use 46–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, Hodgdon TrailBoss, Vihtavuori N32C Tin Star reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, Baschieri & Pellagri 102 Pistol, Vihtavuori N32C Tin Star rank at the top here: for .32 S&W Long N.P. with the .314 | 83gr | Lapua Lead Wadcutter they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate Solo 1250, Accurate Solo 1250, Alliant BE-86 burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1250, Accurate Solo 1250, ADI AS 30 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data