Load data for .32 S&W Long N.P. + .311 | 100gr | LEE Mold 311-100-2R

.32 S&W Long N.P. cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:100 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):0.9154"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:14.8 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:14,504 psi

Load data in caliber .32 S&W Long N.P. with .311 | 100gr | LEE Mold 311-100-2R bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco*²<<locked>>64%12,807 psi88%863 fps90.8%
Baschieri & Pellagri 102 Pistol²<<locked>>64%12,212 psi84%823 fps99.9%
Hodgdon TrailBossᴾ<<locked>>100%12,227 psi84%794 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%10,892 psi75%781 fps99.2%
ReloadSwiss RS 14ᴾ<<locked>>100%7,745 psi53%676 fps98.2%
Vihtavuori N32C Tin Star²<<locked>>68%11,647 psi80%774 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco*²<<locked>>60%11,023 psi76%807 fps88%
Baschieri & Pellagri 102 Pistol²<<locked>>60%10,907 psi75%791 fps99.5%
Hodgdon TrailBoss*²1.9 gr60%4,960 psi34%551 fps93.1%
ReloadSwiss RS 14*²2 gr60%4,656 psi32%541 fps86.4%
ReloadSwiss RS 14*²2 gr60%3,568 psi25%476 fps85.7%
Vihtavuori N32C Tin Star²<<locked>>60%8,920 psi62%702 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 6 powders for .32 S&W Long N.P. loaded with the .311 | 100gr | LEE Mold 311-100-2R. Alliant Herco delivers the highest muzzle velocity at 863 fps; across all powders the maximum-charge window runs from 676 fps to 863 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 6 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (100 MPa), the top charges use 53–88 %, leaving at least 12 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .32 S&W Long N.P. with the .311 | 100gr | LEE Mold 311-100-2R they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant Herco burn incompletely and react more sensitively to barrel length and temperature. Alliant Herco, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data