
Load Specifications
Load data in caliber .32 Long Colt with .314 | 90gr | LEE Mold 314-090-SWC bullet and 11 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 3.5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate Solo 1250*² | <<locked>> | 68% | 13,082 psi | 90% | 801 fps | 90.5% |
| Alliant BE-86*² | <<locked>> | 64% | 11,342 psi | 78% | 764 fps | 91.3% |
| Baschieri & Pellagri 100² | <<locked>> | 64% | 12,995 psi | 90% | 781 fps | 95.3% |
| Baschieri & Pellagri 102 Pistol | <<locked>> | 84% | 12,763 psi | 88% | 807 fps | 97.2% |
| Hodgdon TrailBoss*ᴾ | <<locked>> | 100% | 7,745 psi | 53% | 643 fps | 93.7% |
| Maxam CSB 1*² | <<locked>> | 68% | 12,502 psi | 86% | 784 fps | 89.9% |
| Maxam CSB 2² | <<locked>> | 72% | 12,589 psi | 87% | 833 fps | 95.9% |
| SNPE Vectan BA9 1/2*² | <<locked>> | 64% | 12,792 psi | 88% | 794 fps | 89.8% |
| Vihtavuori N32C Tin Star | <<locked>> | 92% | 12,575 psi | 87% | 781 fps | 100% |
| Vihtavuori N330*² | <<locked>> | 64% | 11,748 psi | 81% | 797 fps | 90.4% |
| Winchester AutoComp *² | <<locked>> | 68% | 11,937 psi | 82% | 778 fps | 87.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 3.5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate Solo 1250*² | <<locked>> | 60% | 10,109 psi | 70% | 722 fps | 85.7% |
| Alliant BE-86*² | <<locked>> | 60% | 9,660 psi | 67% | 715 fps | 88.3% |
| Baschieri & Pellagri 100*² | <<locked>> | 60% | 11,908 psi | 82% | 751 fps | 94% |
| Baschieri & Pellagri 102 Pistol*² | <<locked>> | 60% | 6,672 psi | 46% | 620 fps | 85.9% |
| Hodgdon TrailBoss* | <<locked>> | 80% | 5,236 psi | 36% | 545 fps | 86.4% |
| Maxam CSB 1*² | <<locked>> | 64% | 10,573 psi | 73% | 732 fps | 86.8% |
| Maxam CSB 2*² | <<locked>> | 60% | 8,006 psi | 55% | 696 fps | 87.8% |
| SNPE Vectan BA9 1/2*² | <<locked>> | 60% | 11,806 psi | 81% | 768 fps | 88.3% |
| Vihtavuori N32C Tin Star*² | 1.7 gr | 60% | 5,308 psi | 37% | 561 fps | 92.5% |
| Vihtavuori N330*² | <<locked>> | 60% | 10,820 psi | 75% | 771 fps | 88.8% |
| Winchester AutoComp *² | <<locked>> | 64% | 11,110 psi | 77% | 755 fps | 85.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 11 powders for .32 Long Colt loaded with the .314 | 90gr | LEE Mold 314-090-SWC. Maxam CSB 2 delivers the highest muzzle velocity at 833 fps; across all powders the maximum-charge window runs from 643 fps to 833 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 11 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (100 MPa), the top charges use 53–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .32 Long Colt with the .314 | 90gr | LEE Mold 314-090-SWC they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate Solo 1250, Alliant BE-86, Hodgdon TrailBoss burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1250, Alliant BE-86, Baschieri & Pellagri 100 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.