Load data for .32 Long Colt + .313 | 90gr | H&N WC

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.313 \| 90gr \| H&N WC
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.313" \| 7.95mm
Bullet Length:	0.547" \| 13.9mm
Caliber:	.32 Long Colt load data
Case Length (l3):	0.916" \| 23.3mm
Cartridge Length (C.O.L.):	0.916" \| 23.3mm
Seated Depth:	0.547" \| 13.9mm
Shank Seated Depth:	0.350" \| 8.9mm
Case Capacity:	12.3 Grains of Water \| 0.80 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	14504 psi \| 1000 bar
LID:	LID_B7418_C413
Last updated:	2025-11-10

Load data for 44 loads in caliber .32 Long Colt with .313 | 90gr | H&N WC bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	77%	12952	89%	**7	89%
ADI AS 30	<<locked>>	77%	12444	86%	**5	99%
ADI AS 50N	<<locked>>	77%	12981	89%	**8	95%
Accurate Solo 1000	<<locked>>	72%	12357	85%	**2	94%
[Accurate Solo 1250]*	<<locked>>	88%	12473	86%	**1	86%
Baschieri & Pellagri 100	<<locked>>	79%	12038	83%	**5	91%
[Hodgdon Universal]*	<<locked>>	86%	12952	89%	**7	89%
[Hodgdon CFE Pistol]*	<<locked>>	86%	12676	87%	**4	87%
[Lovex S011]*	<<locked>>	66%	12850	89%	**5	89%
[Maxam CSB 1]*	<<locked>>	93%	12981	89%	**1	87%
Maxam CSB 2	<<locked>>	94%	10950	75%	**8	93%
Maxam CSB 3	<<locked>>	82%	12198	84%	**8	92%
Maxam CSB 4	<<locked>>	80%	12807	88%	**8	96%
Maxam CSB 5	<<locked>>	74%	12459	86%	**5	100%
ReloadSwiss RS 12	<<locked>>	86%	11690	81%	**4	97%
Rottweil P 801	<<locked>>	78%	12502	86%	**7	99%
[SNPE Vectan BA 9]*	<<locked>>	76%	12111	84%	**2	82%
[SNPE Vectan BA9 1/2]*	<<locked>>	81%	11951	82%	**5	86%
Vihtavuori N310	<<locked>>	64%	12270	85%	**2	100%
Vihtavuori N320	<<locked>>	81%	11763	81%	**1	95%
[Vihtavuori N330]*	<<locked>>	88%	12763	88%	**8	89%
[Winchester 231]*	<<locked>>	66%	12009	83%	**5	88%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	63%	8383	58%	**3	81%
ADI AS 30	<<locked>>	68%	9645	67%	**9	96%
ADI AS 50N	<<locked>>	69%	10124	70%	**2	91%
Accurate Solo 1000	<<locked>>	68%	10791	74%	**9	92%
[Accurate Solo 1250]*	<<locked>>	79%	10066	69%	**2	82%
[Baschieri & Pellagri 100]*	<<locked>>	75%	10573	73%	**2	89%
[Hodgdon Universal]*	<<locked>>	70%	8383	58%	**3	81%
[Hodgdon CFE Pistol]*	<<locked>>	76%	9413	65%	**2	81%
[Lovex S011]*	<<locked>>	63%	11400	79%	**2	87%
[Maxam CSB 1]*	<<locked>>	80%	9456	65%	**3	81%
[Maxam CSB 2]*	<<locked>>	82%	7905	55%	**2	86%
[Maxam CSB 3]*	<<locked>>	74%	9616	66%	**3	88%
Maxam CSB 4	<<locked>>	71%	9993	69%	**9	92%
Maxam CSB 5	<<locked>>	64%	9558	66%	**6	98%
ReloadSwiss RS 12	<<locked>>	71%	7585	52%	**9	90%
Rottweil P 801	<<locked>>	64%	7876	54%	**6	94%
[SNPE Vectan BA 9]*	<<locked>>	72%	10950	76%	**6	80%
[SNPE Vectan BA9 1/2]*	<<locked>>	73%	9747	67%	**6	82%
Vihtavuori N310	<<locked>>	60%	10617	73%	**6	100%
Vihtavuori N320	<<locked>>	72%	9224	64%	**6	91%
[Vihtavuori N330]*	<<locked>>	77%	9253	64%	**2	82%
[Winchester 231]*²	<<locked>>	59%	9587	66%	**3	84%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data