Load data for .32 Long Colt + .313 | 100gr | Rim Rock RNFP Top Shelf

.32 Long Colt cartridge drawing
Rim Rock logo

Load Specifications

Bullet Manufacturer:Rim Rock
Bullet Weight:100 gr
Bullet Diameter:0.313"
Bullet Length:<<locked>>
Case Length (l3):0.916"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:12.3 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3.5"
Max. allowed Pressure:14,504 psi

Load data in caliber .32 Long Colt with .313 | 100gr | Rim Rock RNFP Top Shelf bullet and 5 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3.5"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol²<<locked>>72%11,560 psi80%719 fps97.4%
Hodgdon TrailBossᴾ<<locked>>100%10,008 psi69%653 fps98.4%
Maxam CSB 2²<<locked>>64%12,459 psi86%768 fps97.2%
ReloadSwiss RS 14*ᴾ<<locked>>100%8,659 psi60%627 fps92.8%
Vihtavuori N32C Tin Star<<locked>>80%12,343 psi85%712 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 3.5"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol*²<<locked>>60%8,557 psi59%636 fps93.3%
Hodgdon TrailBoss*²1.3 gr60%5,062 psi35%476 fps88.4%
Maxam CSB 2²<<locked>>60%11,473 psi79%745 fps96.2%
ReloadSwiss RS 14*²<<locked>>76%5,918 psi41%522 fps85.6%
Vihtavuori N32C Tin Star²<<locked>>60%7,411 psi51%584 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 5 powders for .32 Long Colt loaded with the .313 | 100gr | Rim Rock RNFP Top Shelf. Maxam CSB 2 delivers the highest muzzle velocity at 768 fps; across all powders the maximum-charge window runs from 627 fps to 768 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 5 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (100 MPa), the top charges use 60–86 %, leaving at least 14 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss rank at the top here: for .32 Long Colt with the .313 | 100gr | Rim Rock RNFP Top Shelf they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, ReloadSwiss RS 14 burn incompletely and react more sensitively to barrel length and temperature. Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss, Maxam CSB 2 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data