Load data for .32 Long Colt + .311 | 100gr | LEE Mold 311-100-2R

.32 Long Colt cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:100 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):0.916"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:12.3 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3.5"
Max. allowed Pressure:14,504 psi

Load data in caliber .32 Long Colt with .311 | 100gr | LEE Mold 311-100-2R bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3.5"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250*²<<locked>>64%12,966 psi89%755 fps92.5%
Alliant BE-86*²<<locked>>64%12,285 psi85%748 fps94.5%
Baschieri & Pellagri 102 Pistol<<locked>>80%12,879 psi89%764 fps98.5%
Hodgdon TrailBossᴾ<<locked>>100%8,485 psi59%630 fps96.7%
Maxam CSB 1*²<<locked>>64%11,400 psi79%712 fps90.4%
Maxam CSB 2²<<locked>>68%12,821 psi88%791 fps97.6%
ReloadSwiss RS 14*ᴾ<<locked>>100%6,904 psi48%591 fps88.6%
Vihtavuori N32C Tin Star<<locked>>88%12,691 psi88%735 fps100%
Winchester AutoComp *²<<locked>>64%12,038 psi83%741 fps89.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 3.5"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250*²<<locked>>60%10,907 psi75%705 fps89.5%
Alliant BE-86*²<<locked>>60%11,371 psi78%725 fps93.4%
Baschieri & Pellagri 102 Pistol*²<<locked>>60%7,237 psi50%607 fps90.1%
Hodgdon TrailBoss*²<<locked>>72%4,627 psi32%486 fps86.2%
Maxam CSB 1*²<<locked>>60%10,457 psi72%689 fps88.8%
Maxam CSB 2*²<<locked>>60%9,805 psi68%715 fps93.9%
ReloadSwiss RS 14*<<locked>>92%6,309 psi44%568 fps86.8%
Vihtavuori N32C Tin Star²1.7 gr60%5,845 psi40%551 fps96%
Winchester AutoComp *²<<locked>>60%10,370 psi72%696 fps86.8%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for .32 Long Colt loaded with the .311 | 100gr | LEE Mold 311-100-2R. Maxam CSB 2 delivers the highest muzzle velocity at 791 fps; across all powders the maximum-charge window runs from 591 fps to 791 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 4 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (100 MPa), the top charges use 48–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .32 Long Colt with the .311 | 100gr | LEE Mold 311-100-2R they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate Solo 1250, Alliant BE-86, Maxam CSB 1 burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1250, Alliant BE-86, Baschieri & Pellagri 102 Pistol stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data