
Load Specifications
Load data in caliber .32 Long Colt with .309 | 86gr | H&N RN HS bullet and 7 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 3.5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 76% | 12,676 psi | 87% | 850 fps | 97.6% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 8,833 psi | 61% | 715 fps | 96.2% |
| Maxam CSB 1*² | <<locked>> | 64% | 13,024 psi | 90% | 846 fps | 91.6% |
| Maxam CSB 2² | <<locked>> | 64% | 12,401 psi | 86% | 869 fps | 96% |
| ReloadSwiss RS 14*ᴾ | <<locked>> | 100% | 7,760 psi | 54% | 692 fps | 89.3% |
| Vihtavuori N32C Tin Star | <<locked>> | 84% | 12,401 psi | 86% | 820 fps | 100% |
| Winchester AutoComp *² | <<locked>> | 64% | 12,676 psi | 87% | 846 fps | 89.4% |
Start Load - Barrel Length: 3.5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol*² | <<locked>> | 60% | 7,934 psi | 55% | 705 fps | 90.4% |
| Hodgdon TrailBoss*² | <<locked>> | 72% | 5,018 psi | 35% | 561 fps | 86.2% |
| Maxam CSB 1*² | <<locked>> | 60% | 11,400 psi | 79% | 801 fps | 89.2% |
| Maxam CSB 2*² | <<locked>> | 60% | 10,747 psi | 74% | 823 fps | 93.9% |
| ReloadSwiss RS 14* | <<locked>> | 92% | 6,730 psi | 46% | 650 fps | 86.3% |
| Vihtavuori N32C Tin Star² | <<locked>> | 60% | 6,121 psi | 42% | 623 fps | 95.3% |
| Winchester AutoComp *² | <<locked>> | 60% | 11,284 psi | 78% | 807 fps | 87.1% |
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 7 powders for .32 Long Colt loaded with the .309 | 86gr | H&N RN HS. Maxam CSB 2 delivers the highest muzzle velocity at 869 fps; across all powders the maximum-charge window runs from 692 fps to 869 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 7 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (100 MPa), the top charges use 54–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, Maxam CSB 1, ReloadSwiss RS 14, Winchester AutoComp burn incompletely and react more sensitively to barrel length and temperature. Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss, Maxam CSB 1 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.