Load data for .32 H&R Mag. + .314 | 90gr | LEE Mold 314-090-SWC

.32 H&R Mag. cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:90 gr
Bullet Diameter:0.314"
Bullet Length:<<locked>>
Case Length (l3):1.067"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:16.2 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:20,305 psi

Load data in caliber .32 H&R Mag. with .314 | 90gr | LEE Mold 314-090-SWC bullet and 16 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250²<<locked>>64%16,708 psi82%978 fps98.3%
Alliant BE-86²<<locked>>64%16,491 psi81%974 fps99.5%
Alliant Herco*<<locked>>80%17,608 psi87%1027 fps93.9%
Alliant UNIQUE*²<<locked>>68%18,043 psi89%1040 fps94.2%
Baschieri & Pellagri 102 Pistol<<locked>>80%17,564 psi87%991 fps100%
Hodgdon TrailBossᴾ<<locked>>100%11,560 psi57%820 fps100%
Maxam CSB 1²<<locked>>68%17,709 psi87%997 fps98.8%
Maxam CSB 2²<<locked>>68%17,811 psi88%1027 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%9,616 psi47%784 fps96.7%
ReloadSwiss RS 20²<<locked>>72%18,362 psi90%1063 fps96.6%
SNPE Vectan A0*²<<locked>>68%17,956 psi88%1001 fps94%
Somchem MS200*²<<locked>>64%17,405 psi86%1001 fps94.8%
Vihtavuori N32C Tin Star<<locked>>92%18,347 psi90%955 fps100%
Vihtavuori N330²<<locked>>64%18,275 psi90%1037 fps99.7%
Vihtavuori N340*²<<locked>>64%16,244 psi80%981 fps93%
Winchester AutoComp ²<<locked>>68%18,028 psi89%1017 fps98.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250²<<locked>>60%14,924 psi74%935 fps97.1%
Alliant BE-86²<<locked>>60%14,895 psi73%938 fps98.8%
Alliant Herco*²<<locked>>64%11,531 psi57%860 fps86.1%
Alliant UNIQUE*²<<locked>>60%13,967 psi69%935 fps89.7%
Baschieri & Pellagri 102 Pistol²<<locked>>60%9,674 psi48%791 fps97.2%
Hodgdon TrailBoss*²1.9 gr60%4,641 psi23%561 fps89.4%
Maxam CSB 1²<<locked>>60%13,460 psi66%892 fps95.9%
Maxam CSB 2²<<locked>>60%13,329 psi66%922 fps99.2%
ReloadSwiss RS 14*²<<locked>>68%5,018 psi25%591 fps85.1%
ReloadSwiss RS 20*²<<locked>>60%12,836 psi63%919 fps90.7%
SNPE Vectan A0*²<<locked>>60%13,967 psi69%906 fps89.9%
Somchem MS200*²<<locked>>60%15,737 psi78%961 fps93.2%
Vihtavuori N32C Tin Star²2.6 gr60%8,325 psi41%725 fps100%
Vihtavuori N330²<<locked>>60%16,360 psi81%997 fps99%
Vihtavuori N340*²<<locked>>60%14,620 psi72%942 fps91.2%
Winchester AutoComp ²<<locked>>60%14,199 psi70%925 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 16 powders for .32 H&R Mag. loaded with the .314 | 90gr | LEE Mold 314-090-SWC. ReloadSwiss RS 20 delivers the highest muzzle velocity at 1,063 fps; across all powders the maximum-charge window runs from 784 fps to 1,063 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 5 of the 16 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (140 MPa), the top charges use 47–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star, Hodgdon TrailBoss rank at the top here: for .32 H&R Mag. with the .314 | 90gr | LEE Mold 314-090-SWC they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant Herco, Alliant UNIQUE, SNPE Vectan A0 burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1250, Alliant BE-86, Alliant Herco stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data