Load data for .32 H&R Magnum + .313 | 100gr | H&N WC KB Match

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.313 \| 100gr \| H&N WC KB Match
Bullet Weight:	100gr \| 6.5g
Bullet Diameter:	0.313" \| 7.95mm
Bullet Length:	<<locked>>
Caliber:	.32 H&R Magnum load data
Case Length (l3):	1.067" \| 27.1mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	16.2 Grains of Water \| 1.05 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	20305 psi \| 1400 bar
LID:	LID_B7421_C411
Last updated:	2026-01-20

Load data for 48 loads in caliber .32 H&R Magnum with .313 | 100gr | H&N WC KB Match bullet and 24 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate No. 2	<<locked>>	68%	18043	89%	**8	93%
Accurate Solo 1250	<<locked>>	73%	17666	87%	**5	100%
Alliant UNIQUE	<<locked>>	75%	17854	88%	**04	96%
Baschieri & Pellagri 102 Pistol	<<locked>>	89%	17535	86%	**1	100%
Baschieri & Pellagri 103 Pistol	<<locked>>	67%	17796	88%	**8	100%
Hodgdon Universal	<<locked>>	68%	17666	87%	**4	100%
Hodgdon CFE Pistol	<<locked>>	70%	17622	87%	**5	99%
Lovex S020	<<locked>>	68%	17260	85%	**1	98%
Maxam CSB 1	<<locked>>	76%	17709	87%	**8	100%
Maxam CSB 2	<<locked>>	78%	18159	89%	**01	100%
Maxam CSB 3	<<locked>>	70%	17709	87%	**8	100%
ReloadSwiss RS 12	<<locked>>	67%	18057	89%	**8	100%
ReloadSwiss RS 20	<<locked>>	78%	17434	86%	**04	98%
[Rottweil P 806]*	<<locked>>	95%	17680	87%	**12	88%
SNPE Vectan A0	<<locked>>	76%	18260	90%	**8	96%
[SNPE Vectan BA7 1/2]*	<<locked>>	83%	18014	89%	**8	87%
SNPE Vectan BA9 1/2	<<locked>>	70%	17941	88%	**1	99%
[SNPE Vectan SP 2]*	<<locked>>	78%	18202	90%	**73	83%
Somchem MP200	<<locked>>	68%	17434	86%	**1	94%
Somchem MS200	<<locked>>	71%	17477	86%	**1	96%
[Vihtavuori 3N37]*	<<locked>>	79%	17796	88%	**07	89%
Vihtavuori N330	<<locked>>	73%	18275	90%	**01	100%
Vihtavuori N340	<<locked>>	73%	17593	87%	**1	96%
[Vihtavuori N350]*	<<locked>>	82%	17825	88%	**04	89%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate No. 2	<<locked>>	66%	17013	84%	**5	92%
Accurate Solo 1250	<<locked>>	71%	16694	82%	**2	99%
Alliant UNIQUE	<<locked>>	68%	14315	71%	**2	93%
Baschieri & Pellagri 102 Pistol	<<locked>>	85%	15766	78%	**9	100%
Baschieri & Pellagri 103 Pistol	<<locked>>	64%	16201	80%	**8	100%
Hodgdon Universal	<<locked>>	64%	15853	78%	**2	99%
Hodgdon CFE Pistol	<<locked>>	67%	15809	78%	**8	99%
Lovex S020	<<locked>>	65%	15302	75%	**5	96%
Maxam CSB 1	<<locked>>	74%	16752	83%	**2	99%
Maxam CSB 2	<<locked>>	70%	14112	70%	**2	100%
Maxam CSB 3	<<locked>>	67%	16650	82%	**9	100%
ReloadSwiss RS 12	<<locked>>	62%	15055	74%	**2	100%
ReloadSwiss RS 20	<<locked>>	71%	14156	70%	**8	95%
[Rottweil P 806]*	<<locked>>	85%	12589	62%	**8	80%
SNPE Vectan A0	<<locked>>	72%	16491	81%	**2	94%
[SNPE Vectan BA7 1/2]*	<<locked>>	78%	15635	77%	**5	85%
SNPE Vectan BA9 1/2	<<locked>>	66%	16041	79%	**5	99%
[SNPE Vectan SP 2]*	<<locked>>	74%	15679	77%	**17	80%
Somchem MP200	<<locked>>	64%	15722	77%	**5	93%
Somchem MS200	<<locked>>	67%	15664	77%	**2	95%
[Vihtavuori 3N37]*	<<locked>>	71%	13880	68%	**9	84%
Vihtavuori N330	<<locked>>	65%	14315	70%	**2	99%
Vihtavuori N340	<<locked>>	70%	15664	77%	**2	95%
[Vihtavuori N350]*	<<locked>>	75%	14634	72%	**2	86%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data