Load data for .32 H&R Mag. + .311 | 93gr | LEE Mold 311-093-1R

.32 H&R Mag. cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:93 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):1.067"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:16.2 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:20,305 psi

Load data in caliber .32 H&R Mag. with .311 | 93gr | LEE Mold 311-093-1R bullet and 13 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250²<<locked>>64%18,217 psi90%1001 fps99.4%
Alliant Herco*²<<locked>>76%17,100 psi84%1007 fps94.3%
Alliant UNIQUE*²<<locked>>64%17,709 psi87%1024 fps94.8%
Baschieri & Pellagri 102 Pistol²<<locked>>76%17,056 psi84%968 fps100%
Hodgdon TrailBossᴾ<<locked>>100%12,212 psi60%827 fps100%
Maxam CSB 1²<<locked>>64%17,347 psi85%981 fps99.1%
Maxam CSB 2²<<locked>>64%17,651 psi87%1010 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%10,849 psi53%810 fps98.6%
ReloadSwiss RS 20²<<locked>>68%17,912 psi88%1043 fps97.1%
SNPE Vectan A0*²<<locked>>64%17,434 psi86%988 fps94.6%
Vihtavuori N32C Tin Star²<<locked>>76%17,042 psi84%919 fps100%
Vihtavuori N340²<<locked>>64%17,883 psi88%1014 fps95.4%
Winchester AutoComp ²<<locked>>64%17,492 psi86%997 fps98.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1250²<<locked>>60%15,577 psi77%945 fps98.2%
Alliant Herco*²<<locked>>60%10,878 psi54%830 fps86.1%
Alliant UNIQUE*²<<locked>>60%15,316 psi75%965 fps92.5%
Baschieri & Pellagri 102 Pistol²<<locked>>60%10,834 psi53%817 fps98.9%
Hodgdon TrailBoss*²2.1 gr60%5,265 psi26%587 fps92.8%
Maxam CSB 1²<<locked>>60%14,881 psi73%922 fps97.8%
Maxam CSB 2²<<locked>>60%15,040 psi74%955 fps100%
ReloadSwiss RS 14*²2.2 gr64%4,888 psi24%574 fps85.8%
ReloadSwiss RS 20*²<<locked>>60%14,040 psi69%948 fps93.5%
SNPE Vectan A0*²<<locked>>60%15,156 psi75%928 fps92.4%
Vihtavuori N32C Tin Star²<<locked>>60%10,312 psi51%774 fps100%
Vihtavuori N340*²<<locked>>60%15,432 psi76%955 fps93.2%
Winchester AutoComp ²<<locked>>60%15,316 psi75%945 fps97.1%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 13 powders for .32 H&R Mag. loaded with the .311 | 93gr | LEE Mold 311-093-1R. ReloadSwiss RS 20 delivers the highest muzzle velocity at 1,043 fps; across all powders the maximum-charge window runs from 810 fps to 1,043 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 13 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (140 MPa), the top charges use 53–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .32 H&R Mag. with the .311 | 93gr | LEE Mold 311-093-1R they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant Herco, Alliant UNIQUE, SNPE Vectan A0 burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1250, Alliant Herco, Alliant UNIQUE stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data