Load data for .308 Win. + .308 | 85gr | MAKER Tipped expanding

.308 Win. cartridge drawing
MAKER logo

Load Specifications

Bullet Manufacturer:MAKER
Bullet Weight:85 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.014"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:56 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:60,191 psi

Load data in caliber .308 Win. with .308 | 85gr | MAKER Tipped expanding bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-7, ADI AR 2207 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%51,909 psi86%3438 fps98.8%
Accurate LT-30<<locked>>98%51,996 psi86%3425 fps96.5%
Accurate No. 11 FS<<locked>>82%53,548 psi89%3468 fps100%
ADI AR 2205<<locked>>86%54,244 psi90%3386 fps100%
ADI AR 2207<<locked>>98%52,794 psi88%3566 fps100%
ADI AR 2219ᴾ<<locked>>100%52,286 psi87%3573 fps96.3%
Alliant AR-Compᴾ<<locked>>100%37,057 psi62%3297 fps97%
Alliant Reloder-10xᴾ<<locked>>100%46,586 psi77%3471 fps98.2%
Alliant Reloder-7<<locked>>96%52,054 psi86%3504 fps99.2%
Baschieri & Pellagri 106ᴾ<<locked>>100%53,867 psi89%3458 fps97.3%
Hodgdon H4198<<locked>>96%53,925 psi90%3488 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%29,878 psi50%2185 fps100%
IMR 4198ᴾ<<locked>>100%49,284 psi82%3474 fps99.2%
IMR 4227<<locked>>92%54,099 psi90%3501 fps100%
Lovex D060<<locked>>86%54,302 psi90%3553 fps99.5%
Lovex S053<<locked>>92%51,547 psi86%3438 fps100%
Norma 200ᴾ<<locked>>100%53,098 psi88%3576 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%29,327 psi49%2231 fps100%
ReloadSwiss RS 36<<locked>>92%53,461 psi89%3527 fps99.9%
Shooters World Buffalo Rifle<<locked>>86%54,302 psi90%3553 fps99.5%
Shooters World SOCOM<<locked>>84%52,431 psi87%3451 fps99.7%
SNPE Vectan BA6 1/2<<locked>>96%52,359 psi87%3274 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%48,037 psi80%3474 fps96.5%
Vihtavuori N110<<locked>>88%53,824 psi89%3399 fps100%
Vihtavuori N120<<locked>>98%52,895 psi88%3510 fps100%
Vihtavuori N130ᴾ<<locked>>100%45,150 psi75%3353 fps97.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%36,927 psi61%3120 fps95.5%
Accurate LT-30<<locked>>94%45,890 psi76%3307 fps95.1%
Accurate No. 11 FS<<locked>>80%50,125 psi83%3409 fps100%
ADI AR 2205<<locked>>80%45,049 psi75%3225 fps100%
ADI AR 220736.8 gr80%29,530 psi49%3028 fps97%
ADI AR 2219<<locked>>98%48,820 psi81%3507 fps95.5%
Alliant AR-Comp<<locked>>96%32,561 psi54%3159 fps95.1%
Alliant Reloder-10x<<locked>>92%35,969 psi60%3222 fps95.4%
Alliant Reloder-739.9 gr84%35,433 psi59%3140 fps95.7%
Baschieri & Pellagri 106<<locked>>94%43,976 psi73%3271 fps95%
Hodgdon H4198<<locked>>94%50,850 psi84%3428 fps95.6%
Hodgdon TrailBoss<<locked>>80%21,524 psi36%1952 fps100%
IMR 4198<<locked>>88%34,577 psi57%3127 fps95.7%
IMR 4227<<locked>>80%37,173 psi62%3146 fps98%
Lovex D060<<locked>>80%45,411 psi75%3369 fps98.3%
Lovex S053<<locked>>80%36,201 psi60%3120 fps99.8%
Norma 200<<locked>>86%33,199 psi55%3133 fps95.3%
ReloadSwiss RS 14<<locked>>80%21,219 psi35%1998 fps100%
ReloadSwiss RS 3638.2 gr80%36,143 psi60%3156 fps97.6%
Shooters World Buffalo Rifle<<locked>>80%45,411 psi75%3369 fps98.3%
Shooters World SOCOM<<locked>>80%45,571 psi76%3320 fps99%
SNPE Vectan BA6 1/2<<locked>>80%33,852 psi56%2933 fps100%
SNPE Vectan SP 3<<locked>>98%44,904 psi75%3409 fps95.7%
Vihtavuori N110<<locked>>80%42,482 psi71%3202 fps100%
Vihtavuori N120<<locked>>80%29,776 psi49%3002 fps98.2%
Vihtavuori N130<<locked>>94%37,275 psi62%3176 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 41 powders for .308 Win. loaded with the .308 | 85gr | MAKER Tipped expanding. Norma 200 delivers the highest muzzle velocity at 3,576 fps; across all powders the maximum-charge window runs from 2,185 fps to 3,576 fps. Accurate 2015 gives the best case fill at 100 %, and 41 of the 41 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (415 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. Accurate 2015, Accurate 2460, ADI AR 2219 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-7, ADI AR 2207, ReloadSwiss RS 36 rank at the top here: for .308 Win. with the .308 | 85gr | MAKER Tipped expanding they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2460, Accurate LT-32, Hodgdon CFE BLK burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data