Load data for .308 Marlin Express + .310 | 125gr | Speer HP TNT

.308 Marlin Express cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:125 gr
Bullet Diameter:0.31"
Bullet Length:<<locked>>
Case Length (l3):1.91"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:47,862 psi

Load data in caliber .308 Marlin Express with .310 | 125gr | Speer HP TNT bullet and 29 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, ADI AR 2219 and IMR 3031.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%42,786 psi89%2680 fps99.3%
Accurate 2015<<locked>>96%42,105 psi88%2753 fps98.7%
Accurate 2495ᴾ<<locked>>100%35,766 psi75%2707 fps97.7%
Accurate LT-30<<locked>>86%41,089 psi86%2638 fps97.1%
ADI AR 2207<<locked>>86%42,786 psi89%2749 fps100%
ADI AR 2219<<locked>>88%40,814 psi85%2762 fps96.8%
Alliant AR-Comp<<locked>>98%41,597 psi87%2835 fps99.9%
Alliant Reloder-10x<<locked>>92%43,033 psi90%2792 fps99.5%
Alliant Reloder-7<<locked>>84%42,032 psi88%2707 fps99.6%
Baschieri & Pellagri 106<<locked>>88%41,829 psi87%2674 fps97.6%
Hodgdon H322<<locked>>92%42,105 psi88%2789 fps97.1%
Hodgdon H335<<locked>>92%42,902 psi90%2805 fps96.3%
Hodgdon H4198<<locked>>84%42,685 psi89%2684 fps96.8%
Hodgdon TrailBossᴾ<<locked>>100%31,647 psi66%1749 fps100%
IMR 3031ᴾ<<locked>>100%41,843 psi87%2851 fps98%
IMR 4198<<locked>>90%42,743 psi89%2736 fps99.8%
Norma 200<<locked>>88%43,134 psi90%2776 fps99.8%
Norma 202ᴾ<<locked>>100%42,525 psi89%2802 fps96.3%
ReloadSwiss RS 14ᴾ<<locked>>100%31,531 psi66%1791 fps100%
Rottweil R 901<<locked>>96%41,669 psi87%2746 fps95.7%
SNPE Vectan BA6 1/2<<locked>>82%41,220 psi86%2474 fps100%
SNPE Vectan SP 3<<locked>>90%41,379 psi86%2746 fps97.9%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%37,594 psi79%2615 fps95.8%
Somchem S335<<locked>>98%42,293 psi88%2723 fps97%
Vihtavuori N120<<locked>>86%42,975 psi90%2707 fps100%
Vihtavuori N130<<locked>>92%41,481 psi87%2697 fps99.1%
Vihtavuori N133<<locked>>98%43,178 psi90%2736 fps98.7%
Vihtavuori N135ᴾ<<locked>>100%37,913 psi79%2726 fps98%
Vihtavuori N140ᴾ<<locked>>100%40,727 psi85%2736 fps96%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,972 psi84%2625 fps98.9%
Accurate 2015<<locked>>86%30,806 psi64%2507 fps95.6%
Accurate 2495<<locked>>94%29,327 psi61%2552 fps95.6%
Accurate LT-30<<locked>>80%34,243 psi72%2487 fps95%
ADI AR 2207<<locked>>80%35,636 psi74%2608 fps100%
ADI AR 221936.3 gr84%35,853 psi75%2654 fps95.2%
Alliant AR-Comp33.2 gr82%25,237 psi53%2408 fps95.5%
Alliant Reloder-10x<<locked>>80%29,718 psi62%2490 fps96.5%
Alliant Reloder-7<<locked>>80%37,188 psi78%2605 fps98.9%
Baschieri & Pellagri 106<<locked>>82%34,505 psi72%2520 fps95.5%
Hodgdon H322<<locked>>88%37,217 psi78%2684 fps95.7%
Hodgdon H335<<locked>>90%40,103 psi84%2749 fps95.4%
Hodgdon H4198<<locked>>80%37,797 psi79%2582 fps95.5%
Hodgdon TrailBoss<<locked>>80%23,322 psi49%1565 fps100%
IMR 303137.2 gr92%32,793 psi69%2635 fps95%
IMR 4198<<locked>>80%31,865 psi67%2497 fps98%
Norma 200<<locked>>80%33,431 psi70%2572 fps98.3%
Norma 202<<locked>>98%40,016 psi84%2753 fps95.6%
ReloadSwiss RS 14<<locked>>80%23,090 psi48%1598 fps100%
Rottweil R 901<<locked>>94%39,523 psi83%2700 fps95.1%
SNPE Vectan BA6 1/2<<locked>>80%39,291 psi82%2441 fps100%
SNPE Vectan SP 3<<locked>>82%32,213 psi67%2536 fps95%
SNPE Vectan Tubal 5000<<locked>>98%35,317 psi74%2566 fps95%
Somchem S335<<locked>>94%37,536 psi78%2628 fps95.7%
Vihtavuori N120<<locked>>80%35,795 psi75%2575 fps100%
Vihtavuori N130<<locked>>80%28,631 psi60%2402 fps95.6%
Vihtavuori N133<<locked>>88%31,836 psi67%2493 fps95.7%
Vihtavuori N135<<locked>>92%29,631 psi62%2523 fps95.2%
Vihtavuori N140<<locked>>98%38,072 psi80%2680 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 29 powders for .308 Marlin Express loaded with the .310 | 125gr | Speer HP TNT. IMR 3031 delivers the highest muzzle velocity at 2,851 fps; across all powders the maximum-charge window runs from 1,749 fps to 2,851 fps. Accurate 2495 gives the best case fill at 100 %, and 29 of the 29 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, ADI AR 2219, IMR 3031 rank at the top here: for .308 Marlin Express with the .310 | 125gr | Speer HP TNT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data