Load data for .308 Marlin Express + .310 | 123gr | Hornady SST

.308 Marlin Express cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:123 gr
Bullet Diameter:0.31"
Bullet Length:<<locked>>
Case Length (l3):1.91"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:15.5

Load data in caliber .308 Marlin Express with .310 | 123gr | Hornady SST bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, Alliant AR-Comp and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%41,742 psi87%2674 fps99%
Accurate 2015<<locked>>96%41,002 psi86%2746 fps98.2%
Accurate 2495ᴾ<<locked>>100%34,301 psi72%2690 fps97.1%
Accurate LT-30<<locked>>88%42,612 psi89%2680 fps97.1%
ADI AR 2207<<locked>>86%41,568 psi87%2743 fps100%
ADI AR 2219<<locked>>90%42,366 psi89%2805 fps96.9%
Alliant AR-Compᴾ<<locked>>100%42,859 psi90%2871 fps99.9%
Alliant Reloder-10x<<locked>>92%41,814 psi87%2782 fps99.2%
Alliant Reloder-7<<locked>>84%40,857 psi85%2697 fps99.3%
Baschieri & Pellagri 106<<locked>>88%40,611 psi85%2661 fps97%
Hodgdon H322<<locked>>92%41,060 psi86%2779 fps96.5%
Hodgdon H4198<<locked>>84%41,959 psi88%2680 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%31,444 psi66%1752 fps100%
IMR 3031ᴾ<<locked>>100%40,524 psi85%2831 fps97.3%
IMR 4198<<locked>>90%41,597 psi87%2726 fps99.6%
Norma 200<<locked>>88%41,930 psi88%2769 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%31,314 psi65%1795 fps100%
Rottweil R 901<<locked>>98%43,076 psi90%2785 fps95.7%
SNPE Vectan BA6 1/2<<locked>>84%42,627 psi89%2513 fps100%
SNPE Vectan SP 10<<locked>>90%42,888 psi90%2812 fps95.8%
SNPE Vectan SP 3<<locked>>92%42,830 psi89%2785 fps97.9%
Somchem S335<<locked>>98%40,959 psi86%2710 fps96.4%
Vihtavuori N120<<locked>>86%41,727 psi87%2703 fps100%
Vihtavuori N130<<locked>>94%42,975 psi90%2740 fps99.1%
Vihtavuori N133<<locked>>98%41,800 psi87%2723 fps98.2%
Vihtavuori N135ᴾ<<locked>>100%36,651 psi77%2713 fps97.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%38,972 psi81%2618 fps98.6%
Accurate 2015<<locked>>88%31,807 psi66%2543 fps95.6%
Accurate 2495<<locked>>96%29,965 psi63%2582 fps95.5%
Accurate LT-30<<locked>>82%35,737 psi75%2533 fps95.2%
ADI AR 2207<<locked>>80%34,476 psi72%2598 fps99.9%
ADI AR 2219<<locked>>86%37,159 psi78%2694 fps95.3%
Alliant AR-Comp33.5 gr84%26,034 psi54%2444 fps95.5%
Alliant Reloder-10x31.1 gr80%28,703 psi60%2474 fps95.7%
Alliant Reloder-7<<locked>>80%36,071 psi75%2595 fps98.5%
Baschieri & Pellagri 106<<locked>>84%35,940 psi75%2562 fps95.6%
Hodgdon H322<<locked>>90%38,580 psi81%2726 fps95.8%
Hodgdon H4198<<locked>>82%39,450 psi82%2628 fps95.6%
Hodgdon TrailBoss<<locked>>80%23,032 psi48%1565 fps100%
IMR 3031<<locked>>94%33,910 psi71%2677 fps95%
IMR 4198<<locked>>80%31,154 psi65%2487 fps97.5%
Norma 20032.3 gr80%32,619 psi68%2566 fps97.9%
ReloadSwiss RS 14<<locked>>80%22,800 psi48%1601 fps100%
Rottweil R 901<<locked>>96%40,538 psi85%2736 fps95%
SNPE Vectan BA6 1/2<<locked>>80%38,421 psi80%2444 fps100%
SNPE Vectan SP 10<<locked>>88%40,059 psi84%2756 fps95%
SNPE Vectan SP 3<<locked>>84%33,576 psi70%2582 fps95.2%
Somchem S335<<locked>>96%38,624 psi81%2661 fps95.7%
Vihtavuori N120<<locked>>80%34,650 psi72%2566 fps100%
Vihtavuori N130<<locked>>80%27,949 psi58%2395 fps95%
Vihtavuori N133<<locked>>90%32,924 psi69%2533 fps95.7%
Vihtavuori N135<<locked>>94%30,589 psi64%2562 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .308 Marlin Express loaded with the .310 | 123gr | Hornady SST. Alliant AR-Comp delivers the highest muzzle velocity at 2,871 fps; across all powders the maximum-charge window runs from 1,752 fps to 2,871 fps. Accurate 2495 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 123.0 gr projectile in 0.31" calls for a 1:15.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, Alliant AR-Comp, Norma 200 rank at the top here: for .308 Marlin Express with the .310 | 123gr | Hornady SST they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data