top of page

Load data for .308 Marlin Express + .308 | 86gr | Hornady InterLock RN

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.308 Marlin Express + .308 | 86gr | Hornady InterLock RN

Load Specifications

Bullet:
.308 | 86gr | Hornady InterLock RN
Manufacturer SKU:
3100
Bullet Weight:
86gr | 5.6g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
0.500" | 12.7mm
Caliber:
.308 Marlin Express
Case Length (l3):
1.910" | 48.5mm
Cartridge Length (C.O.L.):
2.288" | 58.1mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
51.0 Grains of Water | 3.31 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
47863 psi | 3300 bar
LID:
LID_B2650_C397

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .308 Marlin Express with .308 | 86gr | Hornady InterLock RN bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
95%
42815
89%
**14
99%
[ADI AR 2219]*
<<locked>>
97%
42511
89%
**84
92%
[Accurate 1680]*
<<locked>>
85%
42424
89%
**19
94%
[Accurate 2015]*
<<locked>>
97%
32634
68%
**51
92%
Alliant Reloder-10x
<<locked>>
97%
37072
77%
**89
95%
Alliant Reloder-7
<<locked>>
93%
42844
90%
**58
97%
[Baschieri & Pellagri 106]*
<<locked>>
96%
42467
89%
**73
94%
[Hodgdon H4198]*
<<locked>>
93%
42380
89%
**82
92%
Hodgdon TrailBoss
<<locked>>
97%
27441
57%
**80
100%
IMR 4198
<<locked>>
97%
41147
86%
**25
97%
IMR 4227 👍
<<locked>>
87%
42699
89%
**15
99%
Lovex S053
<<locked>>
89%
42569
89%
**12
100%
Norma 200
<<locked>>
97%
41655
87%
**91
97%
ReloadSwiss RS 14
<<locked>>
95%
25991
54%
**00
100%
ReloadSwiss RS 36
<<locked>>
88%
42612
89%
**48
98%
SNPE Vectan BA6 1/2
<<locked>>
91%
42061
88%
**58
100%
Vihtavuori N120 👍
<<locked>>
97%
42163
88%
**51
100%
[Vihtavuori N130]*
<<locked>>
96%
34998
73%
**54
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
26731
56%
**81
95%
[ADI AR 2219]*
<<locked>>
94%
37797
79%
**69
90%
[Accurate 1680]*
<<locked>>
81%
36854
77%
**77
92%
[Accurate 2015]*
<<locked>>
94%
29530
62%
**56
90%
[Alliant Reloder-10x]*
<<locked>>
88%
27746
58%
**20
90%
[Alliant Reloder-7]*
<<locked>>
81%
28558
60%
**81
92%
[Baschieri & Pellagri 106]*
<<locked>>
89%
34098
71%
**66
90%
[Hodgdon H4198]*
<<locked>>
90%
37753
79%
**64
90%
Hodgdon TrailBoss
<<locked>>
81%
20900
44%
**93
100%
[IMR 4198]*
<<locked>>
82%
26440
55%
**92
90%
IMR 4227
<<locked>>
81%
35186
74%
**28
97%
Lovex S053
<<locked>>
81%
33518
70%
**95
99%
[Norma 200]*
<<locked>>
83%
25527
53%
**38
90%
ReloadSwiss RS 14
<<locked>>
81%
20436
43%
**39
100%
ReloadSwiss RS 36
<<locked>>
81%
33576
70%
**28
96%
SNPE Vectan BA6 1/2
<<locked>>
81%
31517
66%
**28
100%
Vihtavuori N120
<<locked>>
81%
25251
53%
**02
96%
[Vihtavuori N130]*
<<locked>>
90%
28123
59%
**54
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page