
Load Specifications
Load data in caliber .308 Marlin Express with .308 | 144gr | Lehigh Defense Match Solid bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Hodgdon H322 and SNPE Vectan SP 3.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 41,162 psi | 86% | 2425 fps | 99.5% |
| Accurate 2015 | <<locked>> | 98% | 42,772 psi | 89% | 2536 fps | 99.2% |
| Accurate 2460 | <<locked>> | 94% | 41,133 psi | 86% | 2526 fps | 96.3% |
| Accurate 2495ᴾ | <<locked>> | 100% | 33,214 psi | 69% | 2441 fps | 97.8% |
| Accurate LT-30 | <<locked>> | 88% | 42,351 psi | 88% | 2434 fps | 97.9% |
| Accurate LT-32 | <<locked>> | 88% | 42,830 psi | 89% | 2438 fps | 96% |
| ADI AR 2207 | <<locked>> | 86% | 41,191 psi | 86% | 2487 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 41,887 psi | 88% | 2556 fps | 97.7% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 42,177 psi | 88% | 2608 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 92% | 40,973 psi | 86% | 2523 fps | 99.6% |
| Alliant Reloder-7 | <<locked>> | 86% | 42,743 psi | 89% | 2487 fps | 99.8% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 42,786 psi | 89% | 2467 fps | 98.3% |
| Hodgdon H322 | <<locked>> | 94% | 43,047 psi | 90% | 2575 fps | 97.9% |
| Hodgdon H335 | <<locked>> | 92% | 41,205 psi | 86% | 2546 fps | 96.5% |
| Hodgdon H4198 | <<locked>> | 84% | 41,524 psi | 87% | 2431 fps | 97.2% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,372 psi | 66% | 1568 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 39,813 psi | 83% | 2579 fps | 98.1% |
| IMR 4198 | <<locked>> | 90% | 41,133 psi | 86% | 2474 fps | 99.9% |
| Lovex S053 | <<locked>> | 82% | 43,236 psi | 90% | 2418 fps | 100% |
| Norma 200 | <<locked>> | 88% | 41,002 psi | 86% | 2507 fps | 99.8% |
| Norma 202ᴾ | <<locked>> | 100% | 40,669 psi | 85% | 2543 fps | 96.5% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,937 psi | 65% | 1601 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 94% | 43,062 psi | 90% | 2552 fps | 95.8% |
| Rottweil R 901 | <<locked>> | 98% | 41,742 psi | 87% | 2523 fps | 96.5% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 42,380 psi | 89% | 2267 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 42,148 psi | 88% | 2556 fps | 96.7% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 42,221 psi | 88% | 2530 fps | 98.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 42,134 psi | 88% | 2467 fps | 96.5% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 35,810 psi | 75% | 2362 fps | 95.9% |
| Somchem S335ᴾ | <<locked>> | 100% | 42,946 psi | 90% | 2510 fps | 97.8% |
| Vihtavuori N120 | <<locked>> | 86% | 41,365 psi | 86% | 2448 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 42,148 psi | 88% | 2480 fps | 99.5% |
| Vihtavuori N133 | <<locked>> | 98% | 41,307 psi | 86% | 2477 fps | 98.8% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 35,853 psi | 75% | 2464 fps | 98.1% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 38,798 psi | 81% | 2474 fps | 96.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 38,406 psi | 80% | 2375 fps | 99.1% |
| Accurate 2015 | <<locked>> | 84% | 27,296 psi | 57% | 2218 fps | 95% |
| Accurate 2460 | <<locked>> | 92% | 38,247 psi | 80% | 2474 fps | 95.5% |
| Accurate 2495 | <<locked>> | 94% | 26,789 psi | 56% | 2290 fps | 95.5% |
| Accurate LT-30 | <<locked>> | 80% | 33,156 psi | 69% | 2254 fps | 95.4% |
| Accurate LT-32 | <<locked>> | 86% | 40,321 psi | 84% | 2392 fps | 95.3% |
| ADI AR 2207 | <<locked>> | 80% | 33,866 psi | 71% | 2352 fps | 100% |
| ADI AR 2219 | 31.8 gr | 84% | 34,156 psi | 71% | 2395 fps | 95.5% |
| Alliant AR-Comp | <<locked>> | 82% | 23,844 psi | 50% | 2172 fps | 95.7% |
| Alliant Reloder-10x | <<locked>> | 80% | 28,108 psi | 59% | 2247 fps | 96.7% |
| Alliant Reloder-7 | <<locked>> | 80% | 35,476 psi | 74% | 2352 fps | 99% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 31,053 psi | 65% | 2234 fps | 95% |
| Hodgdon H322 | 31.5 gr | 86% | 33,315 psi | 70% | 2379 fps | 95.1% |
| Hodgdon H335 | <<locked>> | 90% | 38,493 psi | 80% | 2493 fps | 95.7% |
| Hodgdon H4198 | <<locked>> | 80% | 36,695 psi | 77% | 2339 fps | 95.9% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,887 psi | 48% | 1398 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 31,082 psi | 65% | 2382 fps | 95.2% |
| IMR 4198 | <<locked>> | 80% | 30,618 psi | 64% | 2254 fps | 98.2% |
| Lovex S053 | <<locked>> | 80% | 40,625 psi | 85% | 2375 fps | 100% |
| Norma 200 | <<locked>> | 80% | 31,575 psi | 66% | 2320 fps | 98.5% |
| Norma 202 | <<locked>> | 98% | 38,218 psi | 80% | 2493 fps | 95.8% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,655 psi | 47% | 1430 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 92% | 40,103 psi | 84% | 2497 fps | 95% |
| Rottweil R 901 | <<locked>> | 94% | 37,275 psi | 78% | 2438 fps | 95.2% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 38,000 psi | 79% | 2201 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 86% | 36,695 psi | 77% | 2451 fps | 95.1% |
| SNPE Vectan SP 3 | 28.4 gr | 82% | 30,777 psi | 64% | 2290 fps | 95.3% |
| SNPE Vectan Tubal 3000 | <<locked>> | 94% | 37,115 psi | 78% | 2375 fps | 95.2% |
| SNPE Vectan Tubal 5000 | <<locked>> | 98% | 33,663 psi | 70% | 2320 fps | 95.1% |
| Somchem S335 | <<locked>> | 92% | 33,402 psi | 70% | 2326 fps | 95.1% |
| Vihtavuori N120 | <<locked>> | 80% | 34,142 psi | 71% | 2323 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 27,209 psi | 57% | 2169 fps | 95.9% |
| Vihtavuori N133 | <<locked>> | 86% | 28,558 psi | 60% | 2208 fps | 95.1% |
| Vihtavuori N135 | <<locked>> | 92% | 27,920 psi | 58% | 2277 fps | 95.3% |
| Vihtavuori N140 | <<locked>> | 98% | 36,535 psi | 76% | 2431 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for .308 Marlin Express loaded with the .308 | 144gr | Lehigh Defense Match Solid. Alliant AR-Comp delivers the highest muzzle velocity at 2,608 fps; across all powders the maximum-charge window runs from 1,568 fps to 2,608 fps. Accurate 2495 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 144.0 gr projectile in 0.308" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Hodgdon H322, SNPE Vectan SP 3 rank at the top here: for .308 Marlin Express with the .308 | 144gr | Lehigh Defense Match Solid they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.