Load data for .308 Marlin Express + .308 | 125gr | Remington PSP

.308 Marlin Express cartridge drawing
Remington logo

Load Specifications

Bullet Manufacturer:Remington
Bullet Weight:125 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.91"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:15.0

Load data in caliber .308 Marlin Express with .308 | 125gr | Remington PSP bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Alliant Reloder-10x and Alliant AR-Comp.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%42,105 psi88%2661 fps99.2%
Accurate 2015<<locked>>96%41,452 psi87%2733 fps98.4%
Accurate 2495ᴾ<<locked>>100%34,824 psi73%2677 fps97.4%
Accurate LT-30<<locked>>88%43,294 psi90%2671 fps97.4%
ADI AR 2207<<locked>>86%42,250 psi88%2733 fps100%
ADI AR 2219<<locked>>90%42,801 psi89%2795 fps97.1%
Alliant AR-Comp<<locked>>98%40,640 psi85%2805 fps99.9%
Alliant Reloder-10x<<locked>>92%42,264 psi88%2769 fps99.3%
Alliant Reloder-7<<locked>>84%41,220 psi86%2684 fps99.4%
Baschieri & Pellagri 106<<locked>>88%41,321 psi86%2657 fps97.3%
Hodgdon H322<<locked>>92%41,466 psi87%2766 fps96.8%
Hodgdon H335<<locked>>92%42,119 psi88%2779 fps95.9%
Hodgdon H4198<<locked>>84%42,293 psi88%2667 fps96.6%
Hodgdon TrailBossᴾ<<locked>>100%31,647 psi66%1742 fps100%
IMR 3031ᴾ<<locked>>100%40,988 psi86%2822 fps97.6%
IMR 4198<<locked>>90%41,945 psi88%2713 fps99.7%
Norma 200<<locked>>88%42,380 psi89%2753 fps99.7%
Norma 202ᴾ<<locked>>100%41,974 psi88%2782 fps96%
ReloadSwiss RS 14ᴾ<<locked>>100%31,212 psi65%1778 fps100%
SNPE Vectan BA6 1/2<<locked>>84%43,221 psi90%2500 fps100%
SNPE Vectan SP 3<<locked>>92%43,279 psi90%2772 fps98.1%
SNPE Vectan Tubal 3000<<locked>>98%43,163 psi90%2700 fps96%
Somchem S335<<locked>>98%41,394 psi86%2697 fps96.7%
Vihtavuori N120<<locked>>86%42,438 psi89%2694 fps100%
Vihtavuori N130<<locked>>92%40,799 psi85%2677 fps98.9%
Vihtavuori N133<<locked>>98%42,264 psi88%2713 fps98.4%
Vihtavuori N135ᴾ<<locked>>100%37,072 psi77%2700 fps97.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,276 psi82%2605 fps98.7%
Accurate 2015<<locked>>86%30,153 psi63%2480 fps95.2%
Accurate 2495<<locked>>94%28,471 psi59%2523 fps95.1%
Accurate LT-30<<locked>>82%36,042 psi75%2520 fps95.5%
ADI AR 2207<<locked>>80%35,085 psi73%2592 fps99.9%
ADI AR 2219<<locked>>86%37,507 psi78%2684 fps95.6%
Alliant AR-Comp33.4 gr84%26,281 psi55%2434 fps95.9%
Alliant Reloder-10x31 gr80%29,008 psi61%2464 fps96%
Alliant Reloder-7<<locked>>80%36,405 psi76%2582 fps98.7%
Baschieri & Pellagri 106<<locked>>82%33,982 psi71%2500 fps95.1%
Hodgdon H32236.2 gr88%36,637 psi77%2664 fps95.3%
Hodgdon H335<<locked>>90%39,610 psi83%2730 fps95.1%
Hodgdon H4198<<locked>>80%37,376 psi78%2562 fps95.2%
Hodgdon TrailBoss<<locked>>80%23,192 psi48%1555 fps100%
IMR 3031<<locked>>94%34,258 psi72%2667 fps95.4%
IMR 4198<<locked>>80%31,401 psi66%2477 fps97.7%
Norma 200<<locked>>80%32,938 psi69%2552 fps98.1%
Norma 202<<locked>>98%39,450 psi82%2733 fps95.2%
ReloadSwiss RS 14<<locked>>80%22,974 psi48%1588 fps100%
SNPE Vectan BA6 1/2<<locked>>80%38,653 psi81%2425 fps100%
SNPE Vectan SP 3<<locked>>84%33,852 psi71%2569 fps95.5%
SNPE Vectan Tubal 3000<<locked>>96%40,495 psi85%2651 fps95.3%
Somchem S335<<locked>>94%36,680 psi77%2602 fps95.3%
Vihtavuori N120<<locked>>80%35,288 psi74%2556 fps100%
Vihtavuori N130<<locked>>80%28,224 psi59%2385 fps95.3%
Vihtavuori N133<<locked>>88%31,285 psi65%2470 fps95.3%
Vihtavuori N135<<locked>>94%30,908 psi65%2552 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .308 Marlin Express loaded with the .308 | 125gr | Remington PSP. IMR 3031 delivers the highest muzzle velocity at 2,822 fps; across all powders the maximum-charge window runs from 1,742 fps to 2,822 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 125.0 gr projectile in 0.308" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Alliant Reloder-10x, Alliant AR-Comp rank at the top here: for .308 Marlin Express with the .308 | 125gr | Remington PSP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data