Load data for .308 Marlin Express + .308 | 125gr | Nosler AccuBond

.308 Marlin Express cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:125 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.91"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:14.0

Load data in caliber .308 Marlin Express with .308 | 125gr | Nosler AccuBond bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Alliant Reloder-10x and SNPE Vectan SP 3.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%41,249 psi86%2628 fps98.9%
Accurate 2015<<locked>>98%42,569 psi89%2743 fps98.5%
Accurate 2495ᴾ<<locked>>100%33,634 psi70%2641 fps96.8%
Accurate LT-30<<locked>>88%42,047 psi88%2631 fps96.9%
ADI AR 2207<<locked>>86%41,089 psi86%2700 fps100%
ADI AR 2219<<locked>>90%41,713 psi87%2759 fps96.6%
Alliant AR-Compᴾ<<locked>>100%41,930 psi88%2818 fps99.9%
Alliant Reloder-10x<<locked>>92%40,872 psi85%2730 fps99%
Alliant Reloder-7<<locked>>86%42,786 psi89%2700 fps99.5%
Baschieri & Pellagri 106<<locked>>90%42,859 psi90%2671 fps97.4%
Hodgdon H322<<locked>>94%43,047 psi90%2785 fps97%
Hodgdon H4198<<locked>>84%41,278 psi86%2631 fps96.1%
Hodgdon TrailBossᴾ<<locked>>100%31,357 psi66%1722 fps100%
IMR 3031ᴾ<<locked>>100%39,929 psi83%2785 fps97.1%
IMR 4198<<locked>>92%43,236 psi90%2723 fps99.7%
Lovex S053<<locked>>82%42,917 psi90%2628 fps100%
Norma 200<<locked>>88%41,278 psi86%2720 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%31,227 psi65%1765 fps100%
ReloadSwiss RS 36<<locked>>82%43,294 psi90%2697 fps100%
SNPE Vectan BA6 1/2<<locked>>84%42,177 psi88%2474 fps100%
SNPE Vectan SP 3<<locked>>92%41,945 psi88%2733 fps97.7%
Somchem S335ᴾ<<locked>>100%43,033 psi90%2713 fps96.8%
Vihtavuori N120<<locked>>86%41,249 psi86%2661 fps100%
Vihtavuori N130<<locked>>94%42,134 psi88%2690 fps99%
Vihtavuori N133<<locked>>98%41,147 psi86%2677 fps98%
Vihtavuori N135ᴾ<<locked>>100%35,984 psi75%2664 fps97.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%38,406 psi80%2572 fps98.4%
Accurate 2015<<locked>>88%31,183 psi65%2497 fps95.4%
Accurate 2495<<locked>>96%29,269 psi61%2536 fps95.2%
Accurate LT-30<<locked>>84%37,376 psi78%2536 fps95.6%
ADI AR 2207<<locked>>80%33,881 psi71%2552 fps99.8%
ADI AR 221935.6 gr86%36,724 psi77%2651 fps95.1%
Alliant AR-Comp<<locked>>84%25,541 psi53%2398 fps95.2%
Alliant Reloder-10x30.2 gr80%28,224 psi59%2431 fps95.5%
Alliant Reloder-7<<locked>>80%35,621 psi74%2552 fps98.3%
Baschieri & Pellagri 106<<locked>>84%35,317 psi74%2516 fps95.3%
Hodgdon H322<<locked>>90%37,913 psi79%2677 fps95.5%
Hodgdon H4198<<locked>>82%38,711 psi81%2579 fps95.3%
Hodgdon TrailBoss<<locked>>80%23,018 psi48%1539 fps100%
IMR 3031<<locked>>96%35,186 psi74%2674 fps95.5%
IMR 4198<<locked>>80%30,632 psi64%2441 fps97.3%
Lovex S053<<locked>>80%40,524 psi85%2585 fps100%
Norma 200<<locked>>80%31,879 psi67%2516 fps97.7%
ReloadSwiss RS 14<<locked>>80%22,800 psi48%1575 fps100%
ReloadSwiss RS 36<<locked>>80%40,973 psi86%2654 fps99.9%
SNPE Vectan BA6 1/2<<locked>>80%37,898 psi79%2402 fps100%
SNPE Vectan SP 332.6 gr86%35,085 psi73%2585 fps95.7%
Somchem S335<<locked>>96%37,971 psi79%2615 fps95.4%
Vihtavuori N120<<locked>>80%34,069 psi71%2523 fps100%
Vihtavuori N130<<locked>>82%29,138 psi61%2398 fps95.5%
Vihtavuori N133<<locked>>90%32,445 psi68%2487 fps95.5%
Vihtavuori N135<<locked>>96%31,647 psi66%2559 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .308 Marlin Express loaded with the .308 | 125gr | Nosler AccuBond. Alliant AR-Comp delivers the highest muzzle velocity at 2,818 fps; across all powders the maximum-charge window runs from 1,722 fps to 2,818 fps. Accurate 2495 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 125.0 gr projectile in 0.308" calls for a 1:14.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Alliant Reloder-10x, SNPE Vectan SP 3 rank at the top here: for .308 Marlin Express with the .308 | 125gr | Nosler AccuBond they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data