Load data for .307 Win. + .308 | 110gr | Barnes TSX FB

.307 Win. cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:110 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.014"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:20"
Max. allowed Pressure:60,191 psi
Recommended Twist Rate:1:15.0

Load data in caliber .307 Win. with .308 | 110gr | Barnes TSX FB bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%53,156 psi88%2923 fps99.2%
Accurate 2015ᴾ<<locked>>100%41,350 psi69%2802 fps96.1%
Accurate LT-30<<locked>>98%53,606 psi89%2920 fps97.2%
ADI AR 2205<<locked>>84%52,649 psi87%2818 fps100%
ADI AR 2207<<locked>>96%51,416 psi85%2982 fps100%
ADI AR 2219ᴾ<<locked>>100%54,056 psi90%3061 fps97.1%
Alliant AR-Compᴾ<<locked>>100%38,624 psi64%2825 fps97.8%
Alliant Reloder-10xᴾ<<locked>>100%48,341 psi80%2959 fps98.7%
Alliant Reloder-7<<locked>>96%53,795 psi89%2986 fps99.6%
Baschieri & Pellagri 106<<locked>>98%51,561 psi86%2900 fps97.2%
Hodgdon H4198<<locked>>94%52,199 psi87%2920 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%30,487 psi51%1804 fps100%
IMR 4198ᴾ<<locked>>100%50,850 psi84%2956 fps99.5%
IMR 4227<<locked>>90%52,417 psi87%2917 fps100%
Lovex D060<<locked>>84%52,707 psi88%2956 fps99.6%
Lovex S053<<locked>>92%53,606 psi89%2913 fps100%
Norma 200<<locked>>98%51,488 psi86%2999 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%29,834 psi50%1841 fps100%
ReloadSwiss RS 36<<locked>>90%51,793 psi86%2946 fps99.9%
Shooters World Buffalo Rifle<<locked>>84%52,707 psi88%2956 fps99.6%
Shooters World SOCOM<<locked>>84%53,766 psi89%2927 fps99.9%
SNPE Vectan BA6 1/2<<locked>>96%54,114 psi90%2766 fps100%
SNPE Vectan SP 10ᴾ<<locked>>100%54,244 psi90%3058 fps95.9%
SNPE Vectan SP 3ᴾ<<locked>>100%49,545 psi82%2963 fps97.2%
Vihtavuori N110<<locked>>86%52,968 psi88%2831 fps100%
Vihtavuori N120<<locked>>96%51,517 psi86%2936 fps100%
Vihtavuori N130ᴾ<<locked>>100%46,412 psi77%2854 fps98.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,621 psi59%2592 fps95.5%
Accurate 2015<<locked>>98%38,769 psi64%2749 fps95.3%
Accurate LT-30<<locked>>92%44,295 psi74%2759 fps95.1%
ADI AR 2205<<locked>>80%46,557 psi77%2723 fps100%
ADI AR 220731.4 gr80%30,777 psi51%2566 fps97.8%
ADI AR 2219<<locked>>96%47,239 psi78%2943 fps95.5%
Alliant AR-Comp<<locked>>94%31,763 psi53%2644 fps95.2%
Alliant Reloder-10x<<locked>>90%35,143 psi58%2690 fps95.5%
Alliant Reloder-7<<locked>>80%32,416 psi54%2556 fps95%
Baschieri & Pellagri 106<<locked>>94%45,223 psi75%2792 fps95.8%
Hodgdon H4198<<locked>>92%49,081 psi82%2864 fps95.7%
Hodgdon TrailBoss<<locked>>80%22,060 psi37%1608 fps100%
IMR 4198<<locked>>84%31,952 psi53%2552 fps95.2%
IMR 4227<<locked>>80%38,711 psi64%2667 fps98.7%
Lovex D060<<locked>>80%46,673 psi78%2844 fps98.9%
Lovex S053<<locked>>80%37,434 psi62%2635 fps100%
Norma 20034.5 gr84%32,547 psi54%2612 fps95.5%
ReloadSwiss RS 14<<locked>>80%21,669 psi36%1640 fps100%
ReloadSwiss RS 3632.7 gr80%37,695 psi63%2680 fps98.4%
Shooters World Buffalo Rifle<<locked>>80%46,673 psi78%2844 fps98.9%
Shooters World SOCOM<<locked>>80%47,181 psi78%2818 fps99.4%
SNPE Vectan BA6 1/2<<locked>>80%35,201 psi58%2467 fps100%
SNPE Vectan SP 10<<locked>>98%50,604 psi84%2995 fps95.1%
SNPE Vectan SP 3<<locked>>94%41,307 psi69%2805 fps95.1%
Vihtavuori N110<<locked>>80%44,208 psi73%2697 fps100%
Vihtavuori N120<<locked>>80%31,082 psi52%2543 fps98.9%
Vihtavuori N130<<locked>>92%36,477 psi61%2657 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .307 Win. loaded with the .308 | 110gr | Barnes TSX FB. ADI AR 2219 delivers the highest muzzle velocity at 3,061 fps; across all powders the maximum-charge window runs from 1,804 fps to 3,061 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (415 MPa), the top charges use 50–90 %, leaving at least 10 % headroom. The 110.0 gr projectile in 0.308" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, ADI AR 2219, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, ReloadSwiss RS 36 rank at the top here: for .307 Win. with the .308 | 110gr | Barnes TSX FB they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data